This pull request unifies outbound with inbound under the new feature
and the new email groups feature.
These are workspace level shared inboxes that are shared between all
workspace members.
outbound sending with SES works, we only listen for tenant status
events, rest is managed by AWS
PR refactors old code and webhook to be split for outbound and inbound
for proper separation
| Area | Change |
|---|---|
| AWS SES driver | Split into `AwsSesRegisterDomainService` (tenant +
identity + DKIM + MAIL FROM + configuration-set + EventBridge dest +
contact list) and `AwsSesSendEmailService` (SendEmail). |
| Reputation webhook | New `/webhooks/messaging/ses/outbound` route. SES
→ EventBridge (`Sending Status Enabled/Disabled` on default bus) → SNS →
router → `SesOutboundSendingStateHandlerService` updates
`emailing_domain.tenantStatus`. |
| Inbound webhook | Refactored into `SesInboundWebhookRouterService` +
`SesInboundMailHandlerService`. Shared `SnsSignatureVerifierService` +
`SnsSubscriptionConfirmerService` across both routes. |
| Global uniqueness | New migration + instance command:
`emailing_domain.domain` is now globally unique (one tenant per domain
across workspaces). |
| Tenant status | New `emailing_domain.tenantStatus` column (`ACTIVE` /
`PAUSED`) + `EmailingDomainTenantStatusService`. |
| Send-email mutation | New `sendEmailViaDomain` GraphQL mutation +
DTOs. |
| Cleanup | `EmailingDomainWorkspaceCleanupJob` wired into
`WorkspaceService.deleteWorkspace` — tears down SES tenant association +
identity on workspace delete. |
| Settings UI | Rewritten around reusable `SettingsTableListSection`.
"Email Group" → "Email Handle" rename. New cells for
status/source/forwarding. Outbound domains surfaced on workspace
settings page. |
### Env vars (new)
All in `config-variables.ts`, group `AWS_SES_SETTINGS`, all optional:
- `AWS_SES_REGION` — `@IsAWSRegion`, consumed by `AwsSesClientProvider`
+ driver factory
- `AWS_SES_ACCOUNT_ID` — used for ARN construction in driver factory
- `SES_SNS_TOPIC_ARN_ALLOWLIST` — **shared** by inbound + outbound
webhook routers, comma-separated list of accepted SNS topic ARNs
(verified via `sns-payload-validator`)
### Migrations
- `1778862608620-add-emailing-domain-tenant-status` (fast) — adds
`tenantStatus` column.
- `1778865501791-unique-emailing-domain-globally` (slow, idempotent) —
enforces global uniqueness on `domain`.
- Instance commands bumped to `2.5`.
### Infra dependency
Two coupled twenty-infra PRs:
- `ses-inbound-email` — receipt-rule + inbound SNS topic + S3 bucket
policy + KMS grant + `email_group_*` outputs.
- `ses-outbound-tf` — EventBridge rule + outbound SNS topic + SES IAM
policy + outbound `webhook_url` subscription. **Based on
`ses-inbound-email`.**
Merge order: inbound first, then outbound. Outbound PR's chart edit owns
the comma-joined `SES_SNS_TOPIC_ARN_ALLOWLIST` value (both ARNs).
Features lives under `/settings/general`
<img width="1496" height="845" alt="SCR-20260519-ofhi-2"
src="https://github.com/user-attachments/assets/a025485a-09f7-4131-91cd-0067690ff18d"
/>
---------
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Félix Malfait <FelixMalfait@users.noreply.github.com>
# Introduction
closes https://github.com/twentyhq/private-issues/issues/484
This PR refactors the writeFile API to never expect to be passed a
mimetype, its extract is done programmatically low level so any callers
will pass through
Same for the file sanitization
## IANA override
Disclaimer for consistency we existing behavior we wanted to always have
`application/typescript`
- should we rather consider fallbacking to octect-steam instead ?
- Any pulbic assets that has .ts will now also fallback to
`application/typescript` instead of the official IANA
## Integration
Added coverage
# Introduction
Removing old standard objects `messageChannel` and `messageFolder` and
`calendarChannel`
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
# Introduction
Following connected account permissions refactor and encryption
Removing the old workspace schema twenty standard application
connectedAccount objects and related standard fields and index
- a lot of deadcode
- instance command backfill cleaning the connected account object from
workspaces
## Summary
- Both \`IS_RECORD_PAGE_LAYOUT_EDITING_ENABLED\` and
\`IS_RECORD_PAGE_LAYOUT_GLOBAL_EDITION_ENABLED\` are force-enabled on
every existing workspace by the 1.23.0 upgrade command
\`BackfillRecordPageLayoutsCommand\` and seeded enabled for new
workspaces via \`DEFAULT_FEATURE_FLAGS\` +
\`seed-feature-flags.util.ts\`. They are no longer load-bearing.
- Unwrap all \`if (flag) { … }\` conditionals to their enabled branch on
both server and front.
- Delete legacy fallback files that only the disabled branch reached:
\`PageLayoutRelationWidgetsSyncEffect\`,
\`usePageLayoutWithRelationWidgets\`,
\`reInjectDynamicRelationWidgetsFromDraft\`,
\`injectRelationWidgetsIntoLayout\`, \`isDynamicRelationWidget\` (and
their tests).
- Strip the two \`enableFeatureFlags\` calls from the 1.23 upgrade
command — the page-layout backfill data logic itself is kept intact
since old workspaces upgrading from < 1.23 still need it.
- No DB cleanup migration: stale \`featureFlag\` rows are left in place,
matching the precedent set by #20531 and #20460.
Net diff: 37 files, +106 / -1727.
## Test plan
- [x] \`npx nx typecheck twenty-shared twenty-server twenty-front\` —
all pass
- [x] \`npx nx lint:diff-with-main twenty-server twenty-front\` — all
pass
- [x] \`cd packages/twenty-front && npx jest page-layout\` — 1240 tests,
all pass
- [x] \`cd packages/twenty-server && npx jest
workspace-entity-manager.spec\` — pass
- [ ] Manual smoke: open a record page, verify tabs render and \"Edit
Layout\" command-menu action is available
- [ ] Manual smoke: Settings → Data model → object → Layout tab is
visible (and hidden for remote / Dashboard objects)
- [ ] Manual smoke: edit a tab title, save, reload — confirm persistence
## Summary
- Add email forwarding as a new message channel type, allowing users to
forward emails from addresses like `support@mycompany.com` into Twenty
- Inbound emails arrive via S3 (SES → S3 bucket), are polled by a cron
job, parsed, routed to the correct workspace/channel, and persisted as
messages
- Dedicated settings page at `/settings/accounts/new-email-forwarding`
where users provide their source email handle and receive a unique
forwarding address
- Forwarding channels bypass the IMAP/mailbox sync state machine — they
skip cron-driven sync, relaunch, and message-list-fetch lifecycle stages
- Forwarding address section shown at the top of the Emails settings
page so users can find/copy their addresses after initial setup
- Tab names for forwarding channels display the user-provided handle
(e.g. `support@mycompany.com`) instead of the internal routing address
- Shared utilities extracted from IMAP driver: `extractThreadId`,
`extractParticipants`, `extractAddresses` to avoid code duplication
- Uses the existing S3 bucket (STORAGE_S3_*) with `inbound-email/`
prefix — no separate bucket needed
- Feature gated behind `isEmailForwardingEnabled` client config
(requires `INBOUND_EMAIL_DOMAIN` + S3 storage)
## New backend modules
- `InboundEmailS3ClientProvider` — lazy-initialized S3 client using
existing storage config
- `InboundEmailStorageService` — S3 operations (get, move to
processed/unmatched/failed)
- `InboundEmailParserService` — RFC 822 parsing via `postal-mime`,
builds `MessageWithParticipants`
- `InboundEmailImportService` — orchestrates download → parse → route →
persist → archive
- `MessagingInboundEmailPollCronJob` — polls S3 `incoming/` prefix,
enqueues import jobs
- `CreateEmailForwardingChannelInput` DTO — accepts user-provided
`handle`
## New frontend components
- `SettingsAccountsNewEmailForwardingChannel` — dedicated page with
handle input form + forwarding address result
- `SettingsAccountsEmailForwardingSection` — forwarding address list on
the Emails settings page
- `useConnectedAccountHandleMap` — shared hook for account ID → handle
lookup
- `useCreateEmailForwardingChannel` — mutation hook accepting handle
parameter
## Test plan
- [x] 17 unit tests for inbound email import service (all outcomes:
imported, unmatched, loop_dropped, unconfigured, parse_failed,
persist_failed)
- [x] 16 tests for `computeSyncStatus` including EMAIL_FORWARDING cases
- [x] 11 tests for `extractEnvelopeRecipient` utility
- [x] TypeScript typechecks pass for both twenty-server and twenty-front
- [x] Lint passes for both packages
- [ ] Manual: create forwarding channel, verify forwarding address
generated
- [ ] Manual: send email to forwarding address, verify it appears in
Twenty
https://claude.ai/code/session_01KpyF6p4cUEnuaT4h8DP5Pm
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Copilot Autofix powered by AI <223894421+github-code-quality[bot]@users.noreply.github.com>
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: neo773 <62795688+neo773@users.noreply.github.com>
Co-authored-by: neo773 <neo773@protonmail.com>
## Summary
Removes gauge chart from the chart-type picker and deletes existing
gauge widgets via a workspace migration. The gauge was rendering a
hardcoded `0.7 / "Progress"` stub regardless of configuration -- never
wired to real data.
The contract stays in place. We keep
`WidgetConfigurationType.GAUGE_CHART`, the DTO, the GraphQL union
member, and the gauge folder -- so stored gauge JSON still resolves
through the schema. The render path falls through to `default: return
null`, so any un-migrated gauge widget renders as an empty cell, not a
crash.
This PR just removes existing gauge widgets if there are any (via
`upgrade:2-3:delete-gauge-widgets`). The deliberate cleanup -- deleting
the type definitions, the gauge folder, the DTO -- comes in a follow-up
PR after the migration has run.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
## Summary
The dev seeder creates `ConnectedAccount` records with fake OAuth tokens
(`'exampleRefreshToken'` / `'exampleAccessToken'`) and points
`MessageChannel` / `CalendarChannel` records at them with
`isSyncEnabled: true`. When the sync cron jobs run in the demo
workspace, they:
1. Pick up these seeded channels (filter is `isSyncEnabled: true` +
pending sync stage)
2. Try to refresh the fake OAuth tokens
3. Mark the channels as `FAILED_INSUFFICIENT_PERMISSIONS`
4. Surface a "Sync lost with mailbox X — please reconnect" banner in the
UI
This banner appears every time the demo workspace is loaded, even though
nothing is actually broken.
## Fix
Set `isSyncEnabled: false` on all 12 seeded channels (6 message, 6
calendar). This is the canonical "don't sync this channel" mechanism —
the same state a real user lands in when they toggle sync off in account
settings.
## Why this approach
- **ConnectedAccount records stay**: the demo workspace still shows Tim,
Jony, Phil, Jane as having connected their email/calendar — realistic
- **Pre-seeded messages and calendar events stay visible**: those don't
depend on `isSyncEnabled`
- **Crons no longer pick them up**: they filter on `isSyncEnabled:
true`, so `false` short-circuits the entire sync attempt — no failure,
no banner
- **Semantically correct**: the seeded accounts have fake tokens that
were never going to sync successfully; `isSyncEnabled: true` was
effectively a lie
- **No production code touched**: no `isDemo` flags, no magic-string
detection, no workspace-ID filters in the cron path
## Alternatives considered and rejected
- **Add an `isDemo` flag**: schema change, leaks demo knowledge into
production tables
- **Skip channels with fake tokens (`example*` pattern)**: hacky
magic-string detection in the auth refresh path
- **Filter demo workspace IDs in the cron**: production paths shouldn't
reference demo IDs
- **Don't activate demo workspaces**: breaks the demo workspace UX
entirely
## Test plan
- [ ] Reset the database and reseed (`npx nx database:reset
twenty-server`)
- [ ] Load the demo workspace — confirm no "Sync lost with mailbox"
banner appears
- [ ] Confirm seeded connected accounts still show in Settings →
Accounts
- [ ] Confirm pre-seeded messages and calendar events still appear in
the UI
- [ ] Confirm a real connected account (added via OAuth) still syncs
normally — its channel will have `isSyncEnabled: true` and the cron will
pick it up
## Related
Companion to https://github.com/twentyhq/twenty/pull/20167, which
removes the `--dev-mode` cron filter that was masking this banner issue
in the dev image.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
## Summary
- AI is now GA, so the public/lab `IS_AI_ENABLED` flag is removed from
`FeatureFlagKey`, the public flag catalog, and the dev seeder.
- Drops every backend `@RequireFeatureFlag(IS_AI_ENABLED)` guard (agent,
agent chat, chat subscription, role-to-agent assignment, workflow AI
step creation) and the now-unused `FeatureFlagModule`/`FeatureFlagGuard`
wiring in the AI and workflow modules.
- Removes frontend gating from settings nav, role
permissions/assignment/applicability, command menu hotkeys, side panel,
mobile/drawer nav, and the agent chat provider so AI UI is always on.
Tests and generated GraphQL/SDK schemas updated accordingly.
## Test plan
- [x] `npx nx typecheck twenty-shared`
- [x] `npx nx typecheck twenty-server`
- [x] `npx nx typecheck twenty-front`
- [x] `npx nx lint:diff-with-main twenty-server`
- [x] `npx nx lint:diff-with-main twenty-front`
- [x] `npx jest --config=packages/twenty-server/jest.config.mjs
feature-flag`
- [x] `npx jest --config=packages/twenty-server/jest.config.mjs
workspace-entity-manager`
- [ ] Manual smoke test: AI features still accessible without any flag
row in `featureFlag`
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
## Summary
### Problem
The upgrade migration system required new workspaces to always start
from a workspace command, which was too rigid. When the system was
mid-upgrade within an instance command (IC) segment, workspace creation
would fail or produce inconsistent state.
### Solution
#### Workspace-scoped instance command rows
Instance commands now write upgrade migration rows for **all
active/suspended workspaces** alongside the global row. This means every
workspace has a complete migration history, including instance command
records.
- `InstanceCommandRunnerService` reloads `activeOrSuspendedWorkspaceIds`
immediately before writing records (both success and failure paths) to
mitigate race conditions with concurrent workspace creation.
- `recordUpgradeMigration` in `UpgradeMigrationService` accepts a
discriminated union over `status`, handles `error: unknown` formatting
internally, and writes global + workspace rows in batch.
#### Flexible initial cursor for new workspaces
`getInitialCursorForNewWorkspace` now accepts the last **attempted**
(not just completed) instance command with its status:
- If the IC is `completed` and the next step is a workspace segment →
cursor is set to the last WC of that segment (existing behavior).
- If the IC is `failed` or not the last of its segment → cursor is set
to that IC itself, preserving its status.
This allows workspaces to be created at any point during the upgrade
lifecycle, including mid-IC-segment and after IC failure.
#### Relaxed workspace segment validation
`validateWorkspaceCursorsAreInWorkspaceSegment` accepts workspaces whose
cursor is:
1. Within the current workspace segment, OR
2. At the immediately preceding instance command with `completed` status
(handles the `-w` single-workspace upgrade scenario).
Workspaces with cursors in a previous segment, ahead of the current
segment, or at a preceding IC with `failed` status are rejected.
### Test plan
created empty workspaces to allow testing upgrade with several active
workspaces
Add support for standalone pages: a new `PageLayout` type
(`STANDALONE_PAGE`) that can be rendered independently at
`/page/:pageLayoutId`, not tied to any record or object context.
- New `STANDALONE_PAGE` page layout type
- New `PAGE_LAYOUT` navigation menu item type: adds a `pageLayoutId`
foreign key to `NavigationMenuItemEntity`, allowing sidebar items to
link directly to standalone pages
- New `GLOBAL_OBJECT_CONTEXT` command menu availability type: separates
object-context-dependent commands (Create Record, Import, Export, See
Deleted, Create View, Hide Deleted) from truly global ones, so
standalone pages only show relevant commands
- Frontend routing & rendering: adds a `/page/:pageLayoutId` route with
its own page component, header, and command menu
- Widget rendering refactor
- Instance commands: two fast 1.22 migrations: `pageLayoutId` column +
`STANDALONE_PAGE` enum, and `GLOBAL_OBJECT_CONTEXT` availability type
enum
- Workspace command: backfills existing command menu items from `GLOBAL`
to `GLOBAL_OBJECT_CONTEXT` where appropriate
- Dev seeds: adds a sample "Star History" standalone page with an iframe
widget for local development
- Refactored prefillWorkflowCommandMenuItems and
prefillFrontComponentCommandMenuItems to use
validateBuildAndRunWorkspaceMigration instead of raw TypeORM
createQueryBuilder inserts
- This ensures the flat entity cache is properly updated when seeding
command menu items, fixing the Quick Lead item not appearing after
workspace creation
- Moved command menu item prefill calls outside the transaction since
they now go through the migration pipeline
## Summary
- Removes the `IS_RECORD_TABLE_WIDGET_ENABLED` feature flag, making the
record table widget unconditionally available in dashboard widget type
selection
- The flag was already seeded as `true` for all new workspaces and only
gated UI visibility in one component
(`SidePanelPageLayoutDashboardWidgetTypeSelect`)
- Cleans up the flag from `FeatureFlagKey` enum, dev seeder, and test
mocks
## Analysis
The flag only controlled whether the "View" (Record Table) widget option
appeared in the dashboard widget type selector. The entire record table
widget infrastructure (rendering, creation hooks, GraphQL types,
`RECORD_TABLE` enum in `WidgetType`) is independent of the flag and
fully implemented. No backend logic depends on this flag.
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Charles Bochet <charles@twenty.com>
# Introduction
Refactoring the upgrade engine to handle cross version upgrade,
completely getting rid of the semver `version` at db and runtime level
It remains a visual a listing indicator for or CD process but also
during devenv in order to prepare next release
Will write a release process runbook documentation on how to handle
upgrade step patch, command insertion etc as it needs to be cascaded
across all the involved supported version
**The upgrade sequence model:**
The sequence is a flat, ordered array of upgrade steps
(`UpgradeStep[]`), built from the registry by chaining all versions in
order, each version contributing its fast-instance → slow-instance →
workspace commands sorted by timestamp. Version is metadata for logging,
not used in the algorithm.
**Segments:**
The sequence naturally splits into alternating segments of contiguous
instance steps and contiguous workspace steps. The runner processes
segments in order:
- **Instance segment:** Run sequentially from the instance cursor. Each
step runs once globally.
- **Workspace segment:** Each workspace independently walks from its own
cursor through the end of the segment. Workspaces are independent within
a segment — they can be at different positions.
- **Synchronization (workspace → instance):** The runner blocks before
entering an instance segment. All active/suspended workspaces must have
completed the last workspace step of the preceding workspace segment. If
any workspace failed, abort. This is the only explicit synchronization
point.
- Instance → workspace ordering is implicit — the runner processes
segments sequentially, so the instance segment naturally completes
before the workspace segment begins.
full docs
https://gist.github.com/prastoin/e62106d455fd72d6b6ebada8351e5492
## Version constants & type-level deprecation
Version management is split into three atomic constants:
`TWENTY_PREVIOUS_VERSIONS`, `TWENTY_CURRENT_VERSION`, and
`TWENTY_NEXT_VERSIONS`. Two derived constants compose them:
`CROSS_UPGRADE_SUPPORTED_VERSIONS` (previous + current — what the engine
runs) and `ALL_TWENTY_VERSIONS` (the full ordered tuple including next).
The registry service validates at module init that no version is
duplicated across constants and that at least one previous version
exists.
A `DeprecatedSinceVersion<RemoveAtVersion, T>` type utility resolves to
`T` while `TWENTY_CURRENT_VERSION` is below `RemoveAtVersion`, and to
`never` once it reaches it — turning deprecation into a compile-time
guarantee via `IndexOf` and `IsGreaterOrEqual` generics in
`twenty-shared`.
### `workspace.version` column deprecation
The column is replaced by cursor-based state inference from
`UpgradeMigration` records, but cannot be dropped in 1.22: workspaces
activated during 1.21 predate the cursor system and need their initial
cursor backfilled first (`backfillWorkspaceCreatedIn1_21_0Cursors`).
This backfill itself depends on a new `isInitial` column on
`UpgradeMigration`, bootstrapped via a targeted TypeORM migration before
the upgrade sequence runs.
Both functions and the entity field are typed with
`DeprecatedSinceVersion<'1.23.0', ...>`. When `TWENTY_CURRENT_VERSION`
reaches `1.23.0`, compile errors force their removal — and the
pre-declared `DropWorkspaceVersionColumnFastInstanceCommand` takes over
to drop the column.
## What's next
- ci cross version upgrade ( wip )
- banner asking to contact twenty administrator if workspace is outdated
- upgrade healthcheck cli
## New unit/integ test pattern
Create a dedicated `createNestApp` that consumes a real database in
order not to have to mack any database interaction to the
`upgradeMigrations` allowing full coverage of the whole
`upgradeRunnerService.run` core logic
## Summary
This PR removes the `IS_USAGE_ANALYTICS_ENABLED` feature flag and makes
usage analytics features universally available. The feature flag guard
has been removed from the usage analytics resolver and all conditional
rendering based on this flag has been eliminated.
## Key Changes
- **Removed feature flag dependency**: Deleted
`IS_USAGE_ANALYTICS_ENABLED` from the `FeatureFlagKey` enum in
`twenty-shared`
- **Updated AI Usage tab**: Simplified `SettingsAIUsageTab` to remove
enterprise access checks and feature flag conditionals, now only checks
if ClickHouse is configured
- **Updated Usage Analytics section**: Removed feature flag guard from
`SettingsUsageAnalyticsSection` and added loading/empty state handling
- **Updated AI settings navigation**: Made the Usage tab always visible
in the AI settings tabs, removing conditional rendering based on feature
flag
- **Updated Billing Credits section**: Removed feature flag check before
showing the "View usage" button
- **Updated Settings routes**: Removed `SettingsProtectedRouteWrapper`
with feature flag requirement from usage routes
- **Updated GraphQL resolver**: Removed `@RequireFeatureFlag` decorator
and `FeatureFlagGuard` from the `getUsageAnalytics` query
- **Updated dev seeder**: Removed the feature flag seed entry for
`IS_USAGE_ANALYTICS_ENABLED`
## Implementation Details
- Usage analytics now gracefully handles loading states with
`UsageSectionSkeleton`
- Empty state messaging is shown when no usage data is available yet
- ClickHouse configuration remains the only requirement for usage
analytics functionality
- All enterprise-specific gating for AI usage analytics has been removed
in favor of ClickHouse availability checks
https://claude.ai/code/session_01MRFVXtquL3wS7qmQkDU3AT
---------
Co-authored-by: Claude <noreply@anthropic.com>
## Summary
- **Drop the `objectMetadata.dataSourceId` foreign key and index** via a
1-22 fast instance command — column kept nullable for data preservation
- **Delete `DataSourceService`, `DataSourceModule`, and
`DataSourceException`** — all code now uses `workspace.databaseSchema`
directly
- **Remove `IS_DATASOURCE_MIGRATED` feature flag** from default flags
and all branching logic
- **Simplify workspace/object creation pipelines** —
`WorkspaceManagerService`, `DevSeederService`, and the object creation
action handler no longer route through `DataSourceService`
- **Keep `DataSourceEntity` and the `dataSource` table** for historical
data — entity stripped of all ORM relations
## Context
Due to the chosen strategy for "Reset to default" feature for page
layouts. Those overridable entities need to be associated to the
Standard app to work properly (there is no "Default" state for custom
entities). Until we find a better implementation, I'm changing the
backfill command to reflect that
## Summary
- **Inline email reply**: Replace external email client redirects
(Gmail/Outlook deeplinks) with an in-app email composer. Users can reply
to email threads directly from the email thread widget or via the
command menu.
- **SendEmail GraphQL mutation**: New backend mutation that reuses
`EmailComposerService` for body sanitization, recipient validation, and
SMTP dispatch via the existing outbound messaging infrastructure.
- **Side panel compose page**: Command menu "Reply" action now opens a
side-panel compose email page with pre-filled To, Subject, and
In-Reply-To fields.
### Backend
- `SendEmailResolver` with `SendEmailInput` / `SendEmailOutputDTO`
- `SendEmailModule` wired into `CoreEngineModule`
- Reuses `EmailComposerService` + `MessagingMessageOutboundService`
### Frontend
- `EmailComposer` / `EmailComposerFields` components
- `useSendEmail`, `useReplyContext`, `useEmailComposerState` hooks
- `useOpenComposeEmailInSidePanel` + `SidePanelComposeEmailPage`
- `EmailThreadWidget` inline Reply bar with toggle composer
- `ReplyToEmailThreadCommand` now opens side-panel instead of external
links
### Seeds
- Added `handle` field to message participant seeds for realistic email
addresses
- Seed `connectedAccount` and `messageChannel` in correct batch order
## Test plan
- [ ] Open an email thread on a person/company record → verify
"Reply..." bar appears below the last message
- [ ] Click "Reply..." → composer opens inline with pre-filled To and
Subject
- [ ] Type a message and click Send → email is sent via SMTP, composer
closes
- [ ] Use command menu Reply action → side panel opens with compose
email page
- [ ] Verify Send/Cancel buttons work correctly in side panel
- [ ] Test with Cc/Bcc toggle in composer fields
- [ ] Verify error handling: invalid recipients, missing connected
account
Made with [Cursor](https://cursor.com)
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
## Summary
- Move email thread display from side panel to a dedicated record page
with a new `EMAIL_THREAD` widget type
- Add message thread as a standard object with page layout, subject
field, and backfill command
- Add reply-to-email command menu item for message thread records
- Remove old side panel message thread components in favor of the new
widget-based approach
## Type fixes
- Add `EMAIL_THREAD` to `WidgetConfigurationType`, `WidgetType`, and all
configuration/validator maps
- Create `EmailThreadConfigurationDTO` and shared
`EmailThreadConfiguration` type
- Register EMAIL_THREAD in widget type validators, configuration
resolvers, and standard widget mappings
## Test plan
- [ ] Verify message thread record pages render with the email thread
widget
- [ ] Verify email thread preview navigates to the record page instead
of opening side panel
- [ ] Verify reply-to-email command appears for message thread records
- [ ] Verify typecheck passes for both twenty-front and twenty-server
- [ ] Run existing test suites to check for regressions
🤖 Generated with [Claude Code](https://claude.com/claude-code)
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
## Summary
- Deletes the entire `1-19` upgrade version command directory (7 files,
~1500 lines) and removes all references from the upgrade module and
command runner.
- Removes `IS_NAVIGATION_MENU_ITEM_ENABLED` and
`IS_NAVIGATION_MENU_ITEM_EDITING_ENABLED` feature flags from the enum,
seed data, generated schema files, and test mocks. These flags had no
remaining feature-gated code — navigation menu items are now always
enabled.
## Summary
- Removes `IS_ROW_LEVEL_PERMISSION_PREDICATES_ENABLED` feature flag,
making row-level permission predicates always enabled. Removes
early-return guards from query builders (select, update, insert) and the
shared utility, the public feature flag metadata entry, and
`updateFeatureFlag` calls from integration tests.
- Removes `IS_DATE_TIME_WHOLE_DAY_FILTER_ENABLED` feature flag, making
whole-day datetime filtering always enabled. Simplifies filter input
components and hooks to always use date-only format for `IS` operand on
`DATE_TIME` fields.
- Cleans up enum definitions, seed data, generated schema files, and
test mocks for both flags.
## Summary
- Remove the `IS_APPLICATION_ENABLED` feature flag — application
features are now always enabled
- Remove `@RequireFeatureFlag` decorators and `FeatureFlagGuard` from 7
application resolvers (registration, development, manifest, install,
upgrade, marketplace, oauth)
- Remove frontend feature flag checks: settings navigation visibility,
route protection wrapper, side panel widget type gating, and role
permission flag filtering
- Delete the integration test for disabled-flag behavior
- Clean up seed data, test mocks, and generated schema files
## Summary
- Remove the `IS_DASHBOARD_V2_ENABLED` feature flag from the codebase
- Dashboard V2 features (gauge charts, line charts, pie charts) are now
always enabled
- Remove the validator gate that blocked gauge chart creation/update
without the flag
- Clean up all related code: seed data, dev-seeder service, widget
seeds, and test mocks
## Summary
- Remove 3 completed migration feature flags: `IS_ATTACHMENT_MIGRATED`,
`IS_NOTE_TARGET_MIGRATED`, `IS_TASK_TARGET_MIGRATED` — these were
already enabled by default for all new workspaces via
`DEFAULT_FEATURE_FLAGS`
- Delete all upgrade command directories for versions <= 1.18 (`1-16/`,
`1-17/`, `1-18/`) along with their module registrations, removing ~6,600
lines of dead migration code
- Simplify frontend utility functions
(`getActivityTargetObjectFieldIdName`, `getActivityTargetsFilter`,
`getActivityTargetFieldNameForObject`,
`generateActivityTargetMorphFieldKeys`,
`findActivitiesOperationSignatureFactory`) by removing the
`isMorphRelation` parameter and always using the morph relation path
- Remove feature flag checks from 7 frontend hooks/components that were
gating attachment and activity target behavior behind the removed flags
- Simplify `buildDefaultRelationFlatFieldMetadatasForCustomObject`
server util to always treat attachment, noteTarget, and taskTarget as
morph relations without checking feature flags
Introduce a new feature flag for the record table widget, enabling
conditional rendering and state management based on its status. Update
related components and tests accordingly.
---------
Co-authored-by: Charles Bochet <charlesBochet@users.noreply.github.com>
## 1. The `twenty-client-sdk` Package (Source of Truth)
The monorepo package at `packages/twenty-client-sdk` ships with:
- A **pre-built metadata client** (static, generated from a fixed
schema)
- A **stub core client** that throws at runtime (`CoreApiClient was not
generated...`)
- Both ESM (`.mjs`) and CJS (`.cjs`) bundles in `dist/`
- A `package.json` with proper `exports` map for
`twenty-client-sdk/core`, `twenty-client-sdk/metadata`, and
`twenty-client-sdk/generate`
## 2. Generation & Upload (Server-Side, at Migration Time)
**When**: `WorkspaceMigrationRunnerService.run()` executes after a
metadata schema change.
**What happens in `SdkClientGenerationService.generateAndStore()`**:
1. Copies the stub `twenty-client-sdk` package from the server's assets
(resolved via `SDK_CLIENT_PACKAGE_DIRNAME` — from
`dist/assets/twenty-client-sdk/` in production, or from `node_modules`
in dev)
2. Filters out `node_modules/` and `src/` during copy — only
`package.json` + `dist/` are kept (like an npm publish)
3. Calls `replaceCoreClient()` which uses `@genql/cli` to introspect the
**application-scoped** GraphQL schema and generates a real
`CoreApiClient`, then compiles it to ESM+CJS and overwrites
`dist/core.mjs` and `dist/core.cjs`
4. Archives the **entire package** (with `package.json` + `dist/`) into
`twenty-client-sdk.zip`
5. Uploads the single archive to S3 under
`FileFolder.GeneratedSdkClient`
6. Sets `isSdkLayerStale = true` on the `ApplicationEntity` in the
database
## 3. Invalidation Signal
The `isSdkLayerStale` boolean column on `ApplicationEntity` is the
invalidation mechanism:
- **Set to `true`** by `generateAndStore()` after uploading a new client
archive
- **Checked** by both logic function drivers before execution — if
`true`, they rebuild their local layer
- **Set back to `false`** by `markSdkLayerFresh()` after the driver has
successfully consumed the new archive
Default is `false` so existing applications without a generated client
aren't affected.
## 4a. Logic Functions — Local Driver
**`ensureSdkLayer()`** is called before every execution:
1. Checks if the local SDK layer directory exists AND `isSdkLayerStale`
is `false` → early return
2. Otherwise, cleans the local layer directory
3. Calls `downloadAndExtractToPackage()` which streams the zip from S3
directly to disk and extracts the full package into
`<tmpdir>/sdk/<workspaceId>-<appId>/node_modules/twenty-client-sdk/`
4. Calls `markSdkLayerFresh()` to set `isSdkLayerStale = false`
**At execution time**, `assembleNodeModules()` symlinks everything from
the deps layer's `node_modules/` **except** `twenty-client-sdk`, which
is symlinked from the SDK layer instead. This ensures the logic
function's `import ... from 'twenty-client-sdk/core'` resolves to the
generated client.
## 4b. Logic Functions — Lambda Driver
**`ensureSdkLayer()`** is called during `build()`:
1. Checks if `isSdkLayerStale` is `false` and an existing Lambda layer
ARN exists → early return
2. Otherwise, deletes all existing layer versions for this SDK layer
name
3. Calls `downloadArchiveBuffer()` to get the raw zip from S3 (no disk
extraction)
4. Calls `reprefixZipEntries()` which streams the zip entries into a
**new zip** with the path prefix
`nodejs/node_modules/twenty-client-sdk/` — this is the Lambda layer
convention path. All done in memory, no disk round-trip
5. Publishes the re-prefixed zip as a new Lambda layer via
`publishLayer()`
6. Calls `markSdkLayerFresh()`
**At function creation**, the Lambda is created with **two layers**:
`[depsLayerArn, sdkLayerArn]`. The SDK layer is listed last so it
overwrites the stub `twenty-client-sdk` from the deps layer (later
layers take precedence in Lambda's `/opt` merge).
## 5. Front Components
Front components are built by `app:build` with `twenty-client-sdk/core`
and `twenty-client-sdk/metadata` as **esbuild externals**. The stored
`.mjs` in S3 has unresolved bare import specifiers like `import {
CoreApiClient } from 'twenty-client-sdk/core'`.
SDK import resolution is split between the **frontend host** (fetching &
caching SDK modules) and the **Web Worker** (rewriting imports):
**Server endpoints**:
- `GET /rest/front-components/:id` —
`FrontComponentService.getBuiltComponentStream()` returns the **raw
`.mjs`** directly from file storage. No bundling, no SDK injection.
- `GET /rest/sdk-client/:applicationId/:moduleName` —
`SdkClientController` reads a single file (e.g. `dist/core.mjs`) from
the generated SDK archive via
`SdkClientGenerationService.readFileFromArchive()` and serves it as
JavaScript.
**Frontend host** (`FrontComponentRenderer` in `twenty-front`):
1. Queries `FindOneFrontComponent` which returns `applicationId`,
`builtComponentChecksum`, `usesSdkClient`, and `applicationTokenPair`
2. If `usesSdkClient` is `true`, renders
`FrontComponentRendererWithSdkClient` which calls the
`useApplicationSdkClient` hook
3. `useApplicationSdkClient({ applicationId, accessToken })` checks the
Jotai atom family cache for existing blob URLs. On cache miss, fetches
both SDK modules from `GET /rest/sdk-client/:applicationId/core` and
`/metadata`, creates **blob URLs** for each, and stores them in the atom
family
4. Once the blob URLs are cached, passes them as `sdkClientUrls`
(already blob URLs, not server URLs) to `SharedFrontComponentRenderer` →
`FrontComponentWorkerEffect` → worker's `render()` call via
`HostToWorkerRenderContext`
**Worker** (`remote-worker.ts` in `twenty-sdk`):
1. Fetches the raw component `.mjs` source as text
2. If `sdkClientUrls` are provided and the source contains SDK import
specifiers (`twenty-client-sdk/core`, `twenty-client-sdk/metadata`),
**rewrites** the bare specifiers to the blob URLs received from the host
(e.g. `'twenty-client-sdk/core'` → `'blob:...'`)
3. Creates a blob URL for the rewritten source and `import()`s it
4. Revokes only the component blob URL after the module is loaded — the
SDK blob URLs are owned and managed by the host's Jotai cache
This approach eliminates server-side esbuild bundling on every request,
caches SDK modules per application in the frontend, and keeps the
worker's job to a simple string rewrite.
## Summary Diagram
```
app:build (SDK)
└─ twenty-client-sdk stub (metadata=real, core=stub)
│
▼
WorkspaceMigrationRunnerService.run()
└─ SdkClientGenerationService.generateAndStore()
├─ Copy stub package (package.json + dist/)
├─ replaceCoreClient() → regenerate core.mjs/core.cjs
├─ Zip entire package → upload to S3
└─ Set isSdkLayerStale = true
│
┌────────┴────────────────────┐
▼ ▼
Logic Functions Front Components
│ │
├─ Local Driver ├─ GET /rest/sdk-client/:appId/core
│ └─ downloadAndExtract │ → core.mjs from archive
│ → symlink into │
│ node_modules ├─ Host (useApplicationSdkClient)
│ │ ├─ Fetch SDK modules
└─ Lambda Driver │ ├─ Create blob URLs
└─ downloadArchiveBuffer │ └─ Cache in Jotai atom family
→ reprefixZipEntries │
→ publish as Lambda ├─ GET /rest/front-components/:id
layer │ → raw .mjs (no bundling)
│
└─ Worker (browser)
├─ Fetch component .mjs
├─ Rewrite imports → blob URLs
└─ import() rewritten source
```
## Next PR
- Estimate perf improvement by implementing a redis caching for front
component client storage ( we don't even cache front comp initially )
- Implem frontent blob invalidation sse event from server
---------
Co-authored-by: Charles Bochet <charlesBochet@users.noreply.github.com>
## Summary
This PR adds a comprehensive billing usage analytics feature that
provides detailed breakdowns of credit consumption across execution
types, users, resources, and time periods. The implementation includes a
new ClickHouse-backed analytics service, GraphQL API endpoint, and a
frontend dashboard component.
## Key Changes
### Backend
- **New BillingAnalyticsService**: Queries ClickHouse for usage
breakdowns by user, resource, execution type, and time series data
- **BillingEventWriterService**: Writes billing events to ClickHouse for
analytics while maintaining best-effort semantics (never blocks Stripe
billing)
- **ClickHouse Schema**: Added `billingEvent` table with 3-year TTL for
storing detailed billing event data
- **GraphQL Resolver**: New `getBillingAnalytics` query that aggregates
usage data for the current billing period, protected by feature flag and
billing permissions
- **Enhanced BillingUsageEvent**: Added `userWorkspaceId` field to track
per-user credit consumption
- **AI Billing Integration**: Updated AI billing service to pass
`userWorkspaceId` when recording usage events
### Frontend
- **SettingsBillingAnalyticsSection**: New component displaying:
- Usage breakdown by execution type with progress bars
- Daily usage time series chart (28-day view)
- Per-user credit consumption breakdown
- Per-resource (agent/workflow) credit consumption breakdown
- **SettingsUsage Page**: Dedicated page for viewing usage analytics
- **GraphQL Query**: `GetBillingAnalytics` query with generated hooks
- **Navigation**: Added Usage menu item in settings (feature-flagged)
- **Mock Data**: Included screenshot mock data for preview/testing
### Feature Flag
- Added `IS_USAGE_ANALYTICS_ENABLED` feature flag to control visibility
and access to analytics features
## Implementation Details
- Analytics data is queried in parallel for performance
- ClickHouse writes are non-blocking to ensure billing operations never
fail
- Progress bars use dynamic coloring from a predefined palette
- Time series visualization normalizes bar heights relative to max value
- Empty state handling when no analytics data is available
- Responsive UI with proper text truncation for long names
https://claude.ai/code/session_01Y1EqrX6PFq3EJxJq89h7DF
---------
Co-authored-by: Claude <noreply@anthropic.com>
- Automatically create and sync command menu items for all workflows
with a manual trigger
- Refactor `useCommandMenuItemsFromBackend`
- Prefill a _Quick Lead_ workflow command menu item during workspace
setup and dev seeding
- Add a ready prop to `HeadlessEngineCommandWrapperEffect` to prevent
premature execution when async data hasn't loaded yet
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
## Summary
Fixes#18757
This fixes a set of Favorites / navigation-menu-item integrity problems
related to deleted views, stale hidden items, and upgraded workspaces
with orphaned navigation items.
## What changed
- delete `navigationMenuItem` entries when their favorited view is
deleted
- keep the client metadata store in sync immediately when a view is
deleted
- determine whether a view is already favorited from visible valid
navigation items instead of raw stale items
- add a `1.20.0` upgrade repair command that deletes orphan navigation
menu items and normalizes positions
- add regression coverage for deletion of both record-based and
view-based navigation menu items
## Details
Server:
- extend `NavigationMenuItemDeletionService` so cleanup applies to
deleted views as well as deleted records
- add regression tests covering record-based deletion, view-based
deletion, and no-op behavior
- add `DeleteOrphanNavigationMenuItemsCommand` to remove orphaned items
pointing to:
- deleted views
- deleted records
- missing folders
- normalize positions per scope (`userWorkspaceId + folderId`) after
repair
- wire the new repair command into the `1.20.0` upgrade flow
Frontend:
- add `useRemoveNavigationMenuItemByViewId`
- remove the related navigation item from client metadata immediately
when deleting a view
- use sorted / visible navigation items for favorite detection so stale
hidden rows do not block re-adding a favorite
## Why
Issue `#18757` reports mismatches between Favorites shown in the UI and
rows users can still find in the database. We found that current
Favorites behavior is driven by `navigationMenuItem`, not the legacy
`favorite` table, and that stale / orphaned `navigationMenuItem` rows
could:
- remain after deleting a favorited view
- stay hidden from the UI if they point to invalid targets
- still cause the UI to think a view was already favorited
- persist in workspaces with migration damage from skipped sequential
upgrades
This patch addresses those cases directly and adds an upgrade-time
repair path for older corrupted workspaces.
## Validation
Passed:
- `./node_modules/.bin/jest --config
packages/twenty-server/jest.config.mjs --runInBand
packages/twenty-server/src/engine/metadata-modules/navigation-menu-item/services/__tests__/navigation-menu-item-deletion.service.spec.ts`
- `./node_modules/.bin/tsc -p packages/twenty-front/tsconfig.json
--noEmit --pretty false`
Known unrelated existing failure:
- `./node_modules/.bin/tsc -p packages/twenty-server/tsconfig.json
--noEmit --pretty false`
The server typecheck failure is pre-existing and unrelated to this
branch. Current errors are around `@file-type/pdf` module resolution and
`is-psl-parsed-domain.type.ts`.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
Co-authored-by: Charles Bochet <charlesBochet@users.noreply.github.com>
- Fix duplication of tabs in dashboards that didn't open the duplicated
tab in the side panel: replaced the logic that used Math.round with an
algorithm that switches the positions of the elements. We will keep
relying on integers, but it will work well in all cases.
- Make dnd work with record page layouts, where there is a pinned tab
- Make tab movements work with pinned tab, too
- Allow user to set a tab as the pinned tab
- Make backend changes to be able to save tabs with `layoutMode`
https://github.com/user-attachments/assets/ce1130fa-71df-49ba-ba2f-6f971e15dd49
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
## Summary
- Removes the deprecated `RICH_TEXT` (V1) field metadata type from the
codebase entirely
- Adds a 1.20 upgrade command that migrates existing `RICH_TEXT` fields
to `TEXT` in `core.fieldMetadata`
- Cleans up ~70 files across `twenty-shared`, `twenty-server`,
`twenty-front`, `twenty-sdk`, and `twenty-zapier`
## Context
`RICH_TEXT` was a legacy field type that stored rich text as a single
`text` column. It was already **read-only** — writes threw errors
directing users to `RICH_TEXT_V2` instead. `RICH_TEXT_V2` is the current
approach: a composite type with `blocknote` (editor JSON) and `markdown`
subfields. Keeping the deprecated type added maintenance burden without
any value.
Since the underlying database column type for `RICH_TEXT` was already
`text` (same as `TEXT`), the migration only needs to update the metadata
— no data migration or column changes required.
## Changes
### Upgrade command (new)
- `1-20-migrate-rich-text-to-text.command.ts` — runs `UPDATE
core."fieldMetadata" SET "type" = 'TEXT' WHERE "type" = 'RICH_TEXT'` per
workspace, with cache invalidation
### Enum & shared types
- Removed `RICH_TEXT` from `FieldMetadataType` enum
- Removed from `FieldMetadataDefaultValueMapping`,
`isFieldMetadataTextKind`
### Server (~30 files)
- Removed from type mapper (scalar, filter, order-by), data processors,
input transformer, filter operators, zod schemas, column type mapping,
searchable fields, RLS matching, OpenAPI schema, fake value generators
- Removed from field creation flow and field metadata type validator
- Updated dev seeder Pet `bio` field to `TEXT`
- Cleaned up mocks, snapshots, integration tests
### Frontend (~25 files)
- Deleted: `RichTextFieldDisplay`, `isFieldRichText`,
`isFieldRichTextValue`, `useRichTextFieldDisplay`
- Removed from `FieldDisplay`, `usePersistField`, `isFieldValueEmpty`,
`isRecordMatchingFilter`, `generateEmptyFieldValue`,
`isFieldCellSupported`, spreadsheet import, workflow fake values
- Removed from settings types, field type configs, and field creation
exclusion list
- Updated tests, mocks, and stories
### SDK & Zapier
- Removed from generated GraphQL schema and TypeScript types
- Removed from Zapier `computeInputFields`
## Summary
Implements enterprise licensing and per-seat billing for self-hosted
environments, with Stripe as the single source of truth for subscription
data.
### Components
- **twenty-website** hosts the private key to sign `ENTERPRISE_KEY` and
`ENTERPRISE_VALIDITY_TOKEN`. It communicates with Stripe to emit the
daily `ENTERPRISE_VALIDITY_TOKEN` if the subscription is active, based
on the user's Stripe subscription ID stored in `ENTERPRISE_KEY`.
- **Stripe** is the single source of truth for subscription data
(status, seats, billing).
- **The client** (twenty-server + DB + workers) saves `ENTERPRISE_KEY`
in the `keyValuePair` table (or `.env` if
`IS_CONFIG_VARIABLES_IN_DB_ENABLED` is false) and the daily-renewed
`ENTERPRISE_VALIDITY_TOKEN` in the `appToken` table.
`ENTERPRISE_VALIDITY_TOKEN` is verified client-side using a public key
to grant access to enterprise features (RLS, SSO, audit logs, etc.).
### Flow
1. When requesting an upgrade to an enterprise plan (from **Enterprise**
in settings), the user is shown a modal to choose monthly/yearly
billing, then redirected to Stripe to enter payment details. After
checkout, they land on twenty-website where they are exposed to their
`ENTERPRISE_KEY`, which they paste in the UI. It is saved in the
`keyValuePair` table. On activation, a first `ENTERPRISE_VALIDITY_TOKEN`
with 30-day validity is stored in the `appToken` table.
2. **Every day**, a cron job runs and does two things:
- **Refreshes the validity token**: communicates with twenty-website to
get a new `ENTERPRISE_VALIDITY_TOKEN` with 30-day validity if the Stripe
subscription is still active. If the subscription is in cancellation,
the emitted token has a validity equal to the cancellation date. If it's
no longer valid, the token is not replaced. The cron only needs to run
every 30 days in practice, but runs daily so it's resilient to
occasional failures.
- **Reports seat count**: counts active (non-soft-deleted)
`UserWorkspace` entries and sends the count to twenty-website, which
updates the Stripe subscription quantity with proration. Seats are also
reported on first activation. If the subscription is canceled or
scheduled for cancellation, the seat update is skipped.
3. `ENTERPRISE_VALIDITY_TOKEN` is verified server-side via a public key
to grant access to enterprise features.
### Key concepts
Three distinct checks are exposed as GraphQL fields on `Workspace`:
| Field | Meaning |
|---|---|
| `hasValidEnterpriseKey` | Has any valid enterprise key (signed JWT
**or** legacy plain string) |
| `hasValidSignedEnterpriseKey` | `ENTERPRISE_KEY` is a properly signed
JWT (billing portal makes sense) |
| `hasValidEnterpriseValidityToken` | `ENTERPRISE_VALIDITY_TOKEN` is
present and not expired (expiration depends on signed token payload, not
on "expiresAt" on appToken table which is only indicative) |
Feature access is gated by `isValid()` =
`hasValidEnterpriseValidityToken || hasValidEnterpriseKey` (to support
both new and legacy keys during transition). After transition isValid()
= hasValidEnterpriseValidityToken
### Frontend states
The Enterprise settings page handles multiple states:
- **No key**: show "Get Enterprise" with checkout modal
- **Orphaned validity token** (token valid but no signed key): prompt
user to set a valid enterprise key
- **Active/trialing but no validity token**: show subscription status
with a "Reload validity token" action
- **Active/trialing**: show full subscription info, billing portal
access, cancel option
- **Cancellation scheduled**: show cancellation date, billing portal
- **Canceled**: show billing history link and option to start a new
subscription
- **Past due / Incomplete**: prompt to update payment or restart
### Temporary retro-compatibility: legacy plain-text keys
Previously, enterprise features were gated by a simple check: any
non-empty string in `ENTERPRISE_KEY` granted access. With this PR, we
transition to a controlled system relying on signed JWTs.
To avoid breaking existing self-hosted users:
- **Legacy plain-text keys still grant access** to enterprise features.
`hasValidEnterpriseKey` returns `true` for both signed JWTs and plain
strings, and `isValid()` checks `hasValidEnterpriseKey` as a fallback
when no validity token is present.
- **A deprecation banner** is shown at the top of the app when
`hasValidEnterpriseKey` is `true` but `hasValidSignedEnterpriseKey` is
`false`, informing the user that their key format is deprecated and they
should activate a new signed key.
- **No billing portal or subscription management** is available for
legacy keys since there is no Stripe subscription to manage.
This retro-compatibility will be removed in a future version. At that
point, `isValid()` will only check `hasValidEnterpriseValidityToken`.
### Edge cases
- **Air-gapped / production environments**: for self-hosted clients that
block external traffic (or for our own production), provide a long-lived
`ENTERPRISE_VALIDITY_TOKEN` (e.g. 99 years) directly in the `appToken`
table, with no `ENTERPRISE_KEY`. The daily cron will skip the refresh
(no enterprise key to authenticate with), but the pre-seeded validity
token will be used to grant feature access. No billing or seat reporting
occurs in this mode.
- **`IS_CONFIG_VARIABLES_IN_DB_ENABLED` is false**: if the user tries to
activate an enterprise key but DB config writes are disabled, the
backend returns a clear error asking them to add `ENTERPRISE_KEY` to
their `.env` file manually.
- **Canceled subscriptions**: the `/seats` endpoint skips Stripe updates
for canceled or cancellation-scheduled subscriptions to avoid Stripe API
errors.
### How to test
- launch twenty-website on a different url (eg localhost:1002)
- add ENTERPRISE_API_URL=http://localhost:3002/api/enterprise (or else)
in your server .env
- ask me for twenty-website's .env file content (STRIPE_SECRET_KEY;
STRIPE_ENTERPRISE_MONTHLY_PRICE_ID;STRIPE_ENTERPRISE_YEARLY_PRICE_ID;
ENTERPRISE_JWT_PRIVATE_KEY; ENTERPRISE_JWT_PUBLIC_KEY;
NEXT_PUBLIC_WEBSITE_URL)
- visit Admin panel / enterprise
## PR Description
In the process of migrating all the existing commands to the backend, we
stumbled across a couple of problems that made us reconsider the full
migration. This PR introduces a way for command menu items to bypass
front components and to directly reference a frontend component from
twenty front.
It:
- Introduces a `engineFrontComponentKey` field on `CommandMenuItem` as
an alternative to `frontComponentId` and `workflowVersionId`, allowing
command menu items to reference frontend components by key directly
rather than requiring a FrontComponent entity
- Updates the DB constraint to allow exactly one of `workflowVersionId`,
`frontComponentId`, or `engineFrontComponentKey`
### All standard command menu items from the frontend which use
`standardFrontComponentKey`
These are all commands that execute a GraphQL query or a mutation.
Two mains concerned have been raised that made us go with this
(temporary) architecture instead:
- If those commands are part of the standard application, they can only
alter objects from that application and not custom objects.
- We would need to implement a way to trigger optimistic rendering from
the front components, which might take some time to implement.
List:
- Create new record
- Delete (single record)
- Delete records (multiple)
- Restore record
- Restore records (multiple)
- Permanently destroy record
- Permanently destroy records (multiple)
- Add to favorites
- Remove from favorites
- Merge records
- Duplicate Dashboard
- Save Dashboard
- Save Page Layout
- Activate Workflow
- Deactivate Workflow
- Discard Draft (workflow)
- Test Workflow
- Tidy up workflow
- Duplicate Workflow
- Stop (workflow run)
- Use as draft (workflow version)
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
## Add standard command menu items
### Summary
This PR introduces standard command menu items, migrating hardcoded
command menu actions to the backend command menu item architecture
powered by front components. It adds a new `twenty-standard-application`
package that defines, builds, and registers front components as standard
command menu items, gated behind the `IS_COMMAND_MENU_ITEM_ENABLED`
feature flag.
### Description
- **New `twenty-standard-application` package**: Contains front
component definitions with an esbuild-based build pipeline that
generates minified `.mjs` bundles and a manifest with checksums.
- **Server-side registration**: New constants register all items with
metadata (labels, icons, positions, availability types, conditional
expressions). A `StandardFrontComponentUploadService` uploads built
components to file storage.
- **`FALLBACK` availability type**: New enum value for command menu
items that appear as fallback options (e.g., "Search Records" fallback).
- **`CommandMenuContextApi` refactor**
- **Conditional availability enhancements**: New array-based helper
functions for evaluating multi-record conditions.
- **Frontend wiring** (twenty-front):
`useCommandMenuItemFrontComponentCommands`
## Next steps
Only simple commands have been implemented for now:
- **Navigation (9)** -- `CommandLink`: go-to-companies,
go-to-dashboards, go-to-notes, go-to-opportunities, go-to-people,
go-to-runs, go-to-settings, go-to-tasks, go-to-workflows
- **Side panel (4)** -- `CommandOpenSidePanelPage`: ask-ai,
search-records, search-records-fallback, view-previous-ai-chats
We still have to implement front components for all the following
commands:
All have placeholder `execute` logic (`async () => {}`) with a `// TODO:
implement execute logic` comment:
**Record (22)**
- `add-to-favorites`, `remove-from-favorites`
- `create-new-record`, `create-new-view`
- `delete-single-record`, `delete-multiple-records`
- `destroy-single-record`, `destroy-multiple-records`
- `restore-single-record`, `restore-multiple-records`
- `export-from-record-index`, `export-from-record-show`,
`export-multiple-records`, `export-note-to-pdf`, `export-view`
- `hide-deleted-records`, `see-deleted-records`
- `import-records`, `merge-multiple-records`, `update-multiple-records`
- `navigate-to-next-record`, `navigate-to-previous-record`
**Page layout (3)** -- `cancel-record-page-layout`,
`edit-record-page-layout`, `save-record-page-layout`
**Dashboard (4)** -- `cancel-dashboard-layout`, `duplicate-dashboard`,
`edit-dashboard-layout`, `save-dashboard-layout`
**Workflow (10)** -- `activate-workflow`, `add-node-workflow`,
`deactivate-workflow`, `discard-draft-workflow`, `duplicate-workflow`,
`see-active-version-workflow`, `see-runs-workflow`,
`see-versions-workflow`, `test-workflow`, `tidy-up-workflow`
**Workflow version (4)** -- `see-runs-workflow-version`,
`see-versions-workflow-version`, `see-workflow-workflow-version`,
`use-as-draft-workflow-version`
**Workflow run (3)** -- `see-version-workflow-run`,
`see-workflow-workflow-run`, `stop-workflow-run`
This PR adds the necessary tool to create a demo workspace with :
relevant custom objects and fields, mock data and a real dashboard with
graph widgets.
It is still a bit under-optimized and slow but it works.
This PR also adds an AI tool that allows to see what happens in real
time, it navigates the app and waits when necessary.
---------
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
neo773