## Summary
Fixes#16900 - MS Office documents (doc, docx, ppt, pptx, xls, xlsx,
odt) cannot be previewed when hosted on local/private networks.
## Problem
Microsoft's Office Online viewer (`view.officeapps.live.com`) requires
documents to be publicly accessible from the internet. For self-hosted
Twenty instances or local development, files are not reachable by
Microsoft's servers, causing the viewer to fail with "An error
occurred".
## Solution
Detect private/local URLs upfront and show a helpful message with a
download button instead of letting the viewer fail silently.
**Detected private URLs:**
- `localhost`, `127.0.0.1`, `[::1]`
- Private IP ranges: `10.x.x.x`, `172.16-31.x.x`, `192.168.x.x`
- Local domain patterns: `.local`, `.localhost`, `.internal`
## Alternatives Explored (that don't work)
We investigated more sophisticated detection approaches:
1. **postMessage events** - Microsoft's viewer doesn't send any error
messages we can listen to
2. **Fetching the embed URL** - Blocked by CORS (Microsoft doesn't set
`Access-Control-Allow-Origin`)
3. **Reading iframe content** - Cross-origin restrictions prevent
JavaScript access
The URL-based detection is the most reliable approach for catching the
common cases where preview will definitely fail.
## Testing
1. Upload an Office file (docx, pptx, xlsx) on a local Twenty instance
2. Try to preview it
3. Should see "This file cannot be previewed because it is hosted
locally" with a Download button
Fixes : https://github.com/twentyhq/twenty/issues/17035
There was a bad pattern which risked introduce this bug in
`turnRecordFilterIntoRecordGqlOperationFilter` after recent refactor of
date logic and date filters, which didn't create any bug during dev time
because it wasn't tested with value combinations that existed before the
refactor.
Code has been re-organized to make it resilient to any wrong value
combination.
Also fixed a small bug that appeared during QA with `DATE` filter type,
which was blocking the save button from disappearing after a save.
# Introduction
Followup of
https://github.com/twentyhq/twenty/pull/17001#pullrequestreview-3638508738
close https://github.com/twentyhq/core-team-issues/issues/1910
We've completely decom the `sync-metadata` in production. We're now then
removing its implementation in favor of the v2.
## TODO:
- [x] Remove sync-metadata implem and commands
- [x] Remove workspace decorators
- [x] Type each deprecated field to deprecated on their workspaceEntity
- [x] Remove the `workspace-sync-metadata` folder entirely
- [x] remove workspace migration
- [x] workspace migration removal migration
- [x] remove the `v2` references from workspace manager file names
- [x] remove the `v2` references from workspace manager modules
- [ ] Double check impact on translation file path updates
## Note
- Removed the gate logic
- Remains some service v2 naming, serverless needs to be migrated on v2
fully
- Removed workspaceMigration service app health consumption, making it
always returning up ( no more down ) cc @FelixMalfait ( quite obsolete
health check now, will require complete refactor once we introduce inter
app dependency etc )
I introduced a bug in the chart sorting in this PR:
https://github.com/twentyhq/twenty/pull/16794
This PR fixes this.
The sorting on the first axis is already done by the group by for
FIELD_ASC and FIELD_DESC. It is sorted also for the second axis but in
each group.
For instance, if I create a graph that displays the amount of sales on
each day of the week grouped by vendor
I can have for:
Monday: Vendor B, Vendor C
Tuesday: Vendor A, Vendor B
Wednesday: Vendor A, Vendor C
...
Inside each day the order of the vendor is correct, but by looking at
only one day, I can't know the order of all the vendors.
That is why we always need to sort the second axis.
- Axis labels now respect `axisNameDisplay` config when chart has no
data (previously always showed both) - fixed for bar and line charts
- Horizontal bar charts now correctly map axis settings to visual
positions:
- "X axis" setting → bottom axis (value)
- "Y axis" setting → left axis (category)
video QA
https://github.com/user-attachments/assets/5bf32294-9a5e-4aa6-b3fd-0d4e33608d14
### Problem:
If the command menu page is kept opened while navigating to record show
page then the app crashes.
### Root cause
When navigatiing to a record show page while the command menu page is
kept opened, it tries to open the record show page with command menu
open, as its state were set to true , before navigating to a new page
along with the instance id of previous context which are used in the
current context while rendering the page. Hence, leading to an error
page.
### Changes
while navigation to a record show page the command menu open state is
set to false. This is to handle the navigation gracefully
Fixes: #16577
## Context
The feature has not been maintained for more than a year and was never
officially launched.
This PR removes its code due to the upcoming refactoring of the
sync-metadata that will break its logic if not handled properly and it
would be too costly for the time being.
TODO:
- remove isRemote from object/field metadata
- Add widget validation
- Remove 'None' option for primary axis group by
- Fix error message parsing by passing the operation type in
`useMetadataErrorHandler`
**Bug Fixed**
Creating a new record in the People table view caused a browser memory
crash ("Paused before potential out of memory crash").
**Root Cause**
In useResetVirtualizationBecauseDataChanged.ts, when creating a record,
a loop iterated from 0 to totalNumberOfRecordsToVirtualize (the total
database count).
**Fix Applied**
Changed the loop to only iterate through indices from actually loaded
pages
Fixes https://github.com/twentyhq/twenty/issues/16980
Fixes an issue where column width changes and other view field
modifications were not persisted, and a toast error was shown.
**Root Causes:**
1. Frontend was using client-generated IDs instead of database IDs for
updates
2. Backend cache was stale, causing `View field to update not found`
error
**Changes:**
- Use the existing database ID when updating view fields
- Exclude client-generated IDs when creating new view fields
- Invalidate flat entity maps cache before/after view field operations
- Refresh both view and view field caches to prevent validation errors
Fixes#16417Closes#16381
Closes#16792
## Problem
When editing a currency field’s default value (for example, changing
from **USD** to **UYU**), the **Save** button remained disabled.
However, if the format setting was changed first (**short → full →
short**), the Save button would then work correctly for currency
changes.
## Root Cause
The form was using **React Hook Form’s `values` mode**, which did not
properly track dirty state for the `defaultValue` and `settings` fields.
## Solution
Switched to the **`defaultValues` + `reset()`** pattern:
- Initialize the form with `defaultValues` (using placeholder values)
- Call `reset()` when `fieldMetadataItem` loads
This correctly tracks dirty state by comparing against the most recent
`reset` values.
## Note
A similar pattern is used in:
- `useWebhookForm`
- `useImapSmtpCaldavConnectionForm`
Those hooks call `reset()` via query callbacks. In this case, `reset()`
is called inside a `useEffect` because the data comes from synchronous
Recoil state rather than an async query.
Found two solutions to the problem, created commits for both. I feel the
useEffect pattern makes more sense here since it's cleaner in terms of
code.
---------
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
Fixes https://github.com/twentyhq/twenty/issues/16928 and
https://github.com/twentyhq/private-issues/issues/400
When an object is renamed, its corresponding relation field on
noteTarget and taskTarget are not renamed. This caused an issue as in
the FE, we used the related record object name to compute the field name
used in the payload.
This PR addresses it by, instead, finding the field name after
identifying it thanks to the object id.
To reproduce, you can rename an object then try to tie it to a note.
Fixes https://github.com/twentyhq/twenty/issues/16837
Current flow:
- create workflow run optimistically
- open side panel => triggers query + event stream
- mutation that actually creates the run using the optimistic id
New flow
- create workflow run optimistically
- mutation that actually creates the run using the optimistic id
- open side panel => triggers query + event stream
## Description
SELECT fields have a defined option order that users expect to see
reflected in charts.
This PR allows sorting by that position and also enables custom manual
ordering.
## Video QA
### Reordering on primary axis
https://github.com/user-attachments/assets/994f515e-19cb-4a5e-b745-e8c77e92ae0b
### Reordering on secondary axis
https://github.com/user-attachments/assets/444c16f2-1920-4dc4-8b42-312d520ab43b
Note: The colors in the graph will match the colors of the select
options, but this will be done in another PR
<!-- CURSOR_SUMMARY -->
---
> [!NOTE]
> Introduces new sort modes and UI for chart groupings, with full FE/BE
support and updated GraphQL schema.
>
> - Extend `GraphOrderBy` with `FIELD_POSITION_ASC/DESC` and `MANUAL`;
add corresponding fields in configs: `primaryAxisManualSortOrder`,
`secondaryAxisManualSortOrder`, and `manualSortOrder` (pie)
> - New UI: dropdown options filtered by field type, icons, and a
draggable submenu (`ChartManualSortSubMenuContent`) to reorder select
options; integrates with widget edit flow
> - Sorting logic added/refactored: `sortChartData`,
`sortByManualOrder`, `sortBySelectOptionPosition`,
`sortLineChartSeries`, plus updates to bar/line/pie transformers to
honor new modes and manual orders
> - Default behaviors: select fields default to `FIELD_POSITION_ASC`;
query variable builders skip `orderBy` when using manual/position sorts
> - Update GraphQL generated types/fragments/queries and backend
DTOs/schemas to persist new fields; add tests for sorting utilities and
snapshots; add sorting icons in `twenty-ui`
>
> <sup>Written by [Cursor
Bugbot](https://cursor.com/dashboard?tab=bugbot) for commit
78c9b56c0f1f2d45f7f8b270bb59ca599a005abe. This will update automatically
on new commits. Configure
[here](https://cursor.com/dashboard?tab=bugbot).</sup>
<!-- /CURSOR_SUMMARY -->
---------
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
Co-authored-by: Lucas Bordeau <bordeau.lucas@gmail.com>
Removes the background color logic that was incorrectly added to
PageLayoutGridLayout in PR #16870. Grid layouts are only used for
dashboards where widgets have their own background colors set in
WidgetCard.tsx, so the container background was causing visual
mismatches in padding/gap areas. The background logic remains correctly
applied in PageLayoutVerticalListViewer and PageLayoutVerticalListEditor
where widgets need to inherit the container background.
---------
Co-authored-by: Devessier <baptiste@devessier.fr>
This PR fixes an issue where exiting Settings after renaming a custom
object could redirect to a stale object URL and result in a `404`. When
a custom object name was updated, the memorized navigation URL was not
kept in sync, causing redirects to use the old object route.
The navigation state is now updated only when the memorized URL belongs
to the renamed object, ensuring redirects always point to the correct
route while preserving unrelated navigation context.
Fixes https://github.com/twentyhq/twenty/issues/11291
---------
Co-authored-by: Etienne <45695613+etiennejouan@users.noreply.github.com>
Closes [2029](https://github.com/twentyhq/core-team-issues/issues/2029)
Widgets now use a white background on mobile and in the side panel,
while keeping gray in the side column. Background colors are set at the
parent container level (PageLayoutVerticalListViewer/Editor) so widgets
inherit the correct background, centralizing the background logic in the
container components.
Other variants (dashboard, record-page) specify their own background
color inside `WidgetCard.tsx` file, so we should not have any
regressions.
---------
Co-authored-by: Baptiste Devessier <baptiste@devessier.fr>
click outside listeners for `CommandMenuItemNumberInput` and
`CommandMenuItemTextInput` were always active, even when the input
wasn't focused. This blocked clicks on other elements like toggles in
chart settings.
fixed by only enabling click outside listener when input is actually
focused
Closes [2021](https://github.com/twentyhq/core-team-issues/issues/2021)
Field widgets now show the pen button by default on mobile devices.
Previously, the button was only visible on hover, which doesn't work on
touch devices. The button remains hidden on desktop until hover,
preserving the existing desktop behavior.
Co-authored-by: Baptiste Devessier <baptiste@devessier.fr>
Baptiste Devessier