Parallel code path to read and write core views when
IS_CORE_VIEW_ENABLED.
Migrated view key to an enum.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
Co-authored-by: Lucas Bordeau <bordeau.lucas@gmail.com>
On field selection, we need to retrieve the fieldMetadata to set the
filter type. Current code was using the current step filter
fieldMetdataId instead of the new one.
Also adding a special behaviour for Select filter: it behaves as
arrays/multiselect but the opearands are not the same.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
This PR introduces the usage of record fields in the manipulation of
table columns and board fields.
Since all of the actual system relies on states like tableColumns,
recordIndexFieldDefinitions and the likes, it was required to implement
temporary utils that modifies those states in parallel of the new
generic currentRecordFields, to keep a working product.
With this PR though, currentRecordFields becomes the single source of
truth that gets saved to DB, and the remaining work is just to make the
switch with this new state on all components that are plugged to
tableColumns and the like.
This will be done in another PR.
This PR prepares and simplify option dropdown for using record fields.
I had a problem while trying to use currentRecordFields directly with
ordering so I stayed with the actual column definition system.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
This PR adds a new RecordField abstraction to mimick the behavior of
RecordFilter, RecordSort and other similar concepts that allow to have
something that is not related directly to views.
It is closely following the same pattern with an Effect component to
initialize it from views and CRUD hooks to modify it.
Although for this concept we save to view fields automatically for every
modification.
This PR does not implement saving to view fields, it is just a parallel
code path that is meant to be built to see if everything behaves the
same then we'll remove the old code path at the end by saving record
fields instead of the many states for columns, fields definitions, etc.
This PR prepares the refactor of record field definition and column
definition.
We need to separate the two concepts of FieldInput and FieldContext at
the cell level, and the new RecordField concept that will replace
FieldDefinition at the metadata and state level.
So we create a new ui sub-folder in the already existing record-field
folder, in order to separate those two concepts that are still very
close.
This PR removes useRecordTable barrel-hook and instead use the pattern
that enforces one hook per function.
This allows to have a easier to maintain React code with small dedicated
hooks.
This PR also improves the usage of those hooks by cleaning some logic
that calls them.
We introduce a new hook : `useRecordIndexIdFromCurrentContextStore` that
factorizes logic that was duplicated to retrieve the `recordTableId`.
Introduced `useHandleColumnsChange`, that saves table columns into view,
this could be discussed but is it isolated with a TODO comment so ok for
now.
Also lowered the coverage because not enough to cover with test here.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
In this PR
- Introduction of readableFields and updatableFields in
objectMetadataItem selector to ease filtering from a developer
experience perspective ( + to help developers think to do it). In
discussion @lucasbordeau @charlesBochet
- Remove non-updatable field from CSV import process (@etiennejouan)
- QA fix / Non-readable fields should not show on show page
- QA fix / It should not be offered to create a kanban view on a
non-readable field
- QA fix / It should not be offered to create view groups on a
non-readable field
- QA fix / Rating field should have a readonly mode
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
This PR removes any V2 naming in state management logic and some minor
utils and hooks.
It has a lot of changes but nearly all of them were made by the rename
functionality of vscode which is deterministic, so it shouldn't
introduce any regression.
QA has been made on this PR on the main features of the app without any
noticeable issue.
Also renamed some other v2 naming related items :
- TextInputV2 => TextInput
- TextInput => SettingsTextInput
- ObjectFilterDropdownFilterSelectMenuItemV2 =>
ObjectFilterDropdownFilterSelectMenuItem
- useInitDraftValueV2 => useInitDraftValue
- useOpenRecordTableCellV2 => useOpenRecordTableCell
In our Graphql schema, ids are typed as UUID.
Our FE codegen is typing it as 'any', unless we say otherwise. Fixing it
and fixing the impacts in the codebase
Fixes#13250
This PR fixes the breadcrumb display issue where API names were shown
instead of friendly object names when navigating to related objects in
the detail view.
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
This PR removes every legacy state management logic left in the code
base, we only keep our last component state management logic.
Removed :
- Scoped states logic
- Dropdown scope logic
- Scope id naming
- Component state v1
- Component state v2_alpha
# QA
| Component | Comments |
| --- | --- |
| AttachementDropdown | Ok |
| ObjectTasks | Ok |
| ActivityRichTextEditor | Ok |
| App | Ok dialogs work |
| AppRouterProviders | Ok dialogs work |
| RecordBoardScrollToFocusedCardEffect | Ok |
| RecordBoard | Ok |
| RecordBoardCard | OK |
| useSelectAllCards | Ok |
| RecordInlineCell | Ok |
| useInlineCell | Ok |
| RecordDetailRelationRecordsListItem | Ok |
| RecordDetailRelationSectionDropdownToMany | Ok |
| RecordDetailRelationSectionDropdownToOne | Ok |
| useHandleContainerMouseEnter | Ok |
| useResetTableRowSelection | Ok |
| useSelectAllRows | Ok |
| useSetRecordTableData | Ok |
| useRecordTable | Ok |
| useRecordTableMoveFocusedCell | Ok |
| useRecordTableMoveFocusedRow | Ok |
| useMoveHoverToCurrentCell | OK |
| useTriggerActionMenuDropdown | Ok |
| RecordTableBodyDragDropContextProvider | Ok |
| RecordTableHeaderCell | Ok |
| useSetCurrentRowSelected | Ok |
| useRecordTitleCell | Ok |
| SettingsObjectFieldActiveActionDropdown | Ok |
| SettingsObjectFieldInactiveActionDropdown | Ok |
| SettingsObjectFieldItemTableRow | Ok |
| SettingsObjectInactiveMenuDropDown | Ok |
| SettingsRoleEditEffect | Ok |
| SettingsRolesQueryEffect | Ok |
| Dropdown | Ok |
| useSelectableList | Ok |
| useSelectableListHotKeys | Ok |
| useSelectableListListenToEnterHotkeyOnItem | Ok |
| useNavigationSection | Ok |
| useCreateViewFromCurrentState | Ok |
| useDeleteViewFromCurrentState | Ok |
| useUpdateViewFromCurrentState | Ok |
| ViewPickerFavoriteFoldersDropdown | Ok |
| useCreateViewFromCurrentView | Ok |
| ViewBarDetails | Ok |
| WorkflowRunVisualizer | Ok |
| useHandleWorkflowRunDiagramCanvasInit | Ok |
| WorkflowDiagramCanvasBase | Ok |
| WorkflowRunVisualizerEffect | Ok |
| useRemoveStepFilter | Ok |
| useRemoveStepFilterGroup | Ok |
| useUpsertStepFilterSettings | Ok |
| WorkflowFindRecordsFilters | Ok |
| SettingsObjects | Ok |
This PR adds the ability to save an any field filter to a view.
It adds a new `anyFieldFilterValue` on both core view and workspace view
entities.
It also introduces the necessary utils that mimic the logic that manages
the save of record filters and record sorts on views.
This PR adds any field filter request generation utils with its unit
test.
It also calls this new util in the relevant requests for table and
board.
This PR also adds a new corresponding state in context store so that the
filter is handled in command menu and actions.
We also add this new filter to the aggregate queries.
The RecordShowPage story was also fixed.
This PR adds the frontend logic to handle the user input of a search any
field value.
It also adds the associated feature flag, that can be modified from the
admin panel.
This PR does not add the filtering part nor the saving on view logic,
which will come in their separate PRs.
https://github.com/user-attachments/assets/6a52c090-b957-46aa-bff7-a90b51109789
This PR improves dropdown menu headers for filter and sort dropdown in
view bar and editable filter chips.
It adds what's necessary to navigate back or close the dropdown, so that
we don't rely solely on click outside to exit the dropdown.
This PR also refactors the components so that we clearly identify the
two code paths that can use filter dropdowns : view bar and filter chip,
everything that can be DRY stays in the object-filter-dropdown module
but we try to have our wrapping components in each distinct module
instead of blending everything with ternaries inside
object-filter-dropdown module.
The vector search input value wasn't correctly handled across the
different dropdowns, due to a wrong component instance management, since
the dropdown menu header improvement put this into light, I also
refactored the state management of the vector search input.
@Bonapara please check the QA video and tell me if it's ok, I didn't add
dropdown menu header on the advanced filter field list dropdown because
it's a select more than a standalone dropdown, what do you think ?
QA :
https://github.com/user-attachments/assets/17080f32-f302-436c-937b-3577715b7e84
QA Vector search fix :
https://github.com/user-attachments/assets/6367bbf6-8a98-4b53-86cf-6ba92be130eb
Fixes https://github.com/twentyhq/core-team-issues/issues/640
Fixes https://github.com/twentyhq/core-team-issues/issues/1206
Step operand will more or less be the same as view filter operand.
This PR:
- moves `ViewFilterOperand` to twenty-shared
- use it as step operand
- check what operand should be available based on the selected field
type in filter action
- rewrite the function that evaluates filters so it uses
ViewFilterOperand instead
ViewFilterOperand may be renamed in a future PR.
This PR removes useDropdown barrel hook and refactors the legacy
useDropdown states to the last version of our recoil component state
management.
---------
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
This PR fixes a mismatch between the filter operation we have on NUMBER
and RATING field types, and the labels we use for those filters in the
application.
What is actually used is :
- Greater than or equal
- Less than or equal
But unfortunately, until now we display "less than" and "greater than"
everywhere.
This PR fixes that.
We would still have to change the value that is saved in viewFilter
table from `greaterThan` to `greaterThanOrEqual` and likewise for less
than, but it would require a careful migration, and for now just
changing the display labels is enough.
See follow-up issue for migration of the DB values :
https://github.com/twentyhq/core-team-issues/issues/1196
Fixes https://github.com/twentyhq/twenty/issues/13000
This PR replaces the many calls of useDropdown by the new standalone
hooks : useCloseDropdown, useOpenDropdown and useToggleDropdown.
This will allow to remove useDropdown and then the dropdown recoil
component state v1.
A big round of QA has been made, with some bugs caught along the way.
Closes https://github.com/twentyhq/core-team-issues/issues/1155
Closes https://github.com/twentyhq/core-team-issues/issues/618
## QA
Component|Status|Comment
|---|---|---|
CurrentWorkspaceMemberFavorites|Ok|
FavoriteFolderPickerFooter|Ok|
AdvancedFilterAddFilterRuleSelect|Ok|
AdvancedFilterRecordFilterGroupOptionsDropdown|Ok|
AdvancedFilterRecordFilterOperandSelectContent|Ok|
AdvancedFilterRecordFilterOptionsDropdown|Ok|
useAdvancedFilterFieldSelectDropdown|Ok|
ObjectFilterDropdownBooleanSelect|Ok|
ObjectFilterDropdownOptionSelect|Ok|
ObjectOptionsDropdown|Ok|
ObjectOptionsDropdownLayoutContent|Ok|
ObjectSortDropdownButton|Ok|
useCloseSortDropdown|Ok|
FormDateTimeFieldInput|Ok|Bug detected, cannot select a month or a year,
see issue https://github.com/twentyhq/twenty/issues/12922
FormSingleRecordPicker|Ok|
MultiItemFieldMenuItem|Ok|
RecordDetailRelationRecordsListItem|Ok|
RecordDetailRelationSection|Ok|
RecordDetailRelationSectionDropdownToMany|Ok|
RecordDetailRelationSectionDropdownToOne|Ok|
RecordTableColumnAggregateFooterDropdownSubmenuContent|Ok|
RecordTableColumnAggregateFooterAggregateOperationMenuItems|Ok|
RecordTableColumnAggregateFooterMenuContent|Ok|
RecordTableColumnAggregateFooterValueCell|Ok|
RecordTableColumnHeadDropdownMenu|Ok|
RecordTableHeaderPlusButtonContent|Ok|
useTriggerActionMenuDropdown|Ok|
MultipleSelectDropdown|Ok|
RecordBoardColumnHeaderAggregateDropdownButton|Ok|
SettingsDataModelFieldSelectFormOptionRow|Ok|
SettingsDataModelNewFieldBreadcrumbDropDown|Ok|
SettingsObjectFieldActiveActionDropdown|Ok|
SettingsObjectFieldInactiveActionDropdown|Ok|
SettingsObjectInactiveMenuDropDown|Ok|
SettingsSecurityApprovedAccessDomainRowDropdownMenu|Couldn’t test|
SettingsSecuritySSORowDropdownMenu|Couldn’t test|
SettingsAccountsRowDropdownMenu|Ok|
SettingsRoleAssignment|Ok|
SettingsServerlessFunctionTabEnvironmentVariableTableRow|Couldn’t test|
MatchColumnToFieldSelect|Ok|
SubMatchingSelectDropdownButton|Ok|Removed conflicting duplicate open
dropdown
SubMatchingSelectRowRightDropdown|Ok|
CurrencyPickerDropdownButton|Ok|
IconPicker|Ok|
DateTimePicker|Ok|
PhoneCountryPickerDropdownButton|OK|
Select|Ok|
Dropdown|Ok|Not QAing all dropdowns in the app because the ones of this
QA are enough to show up that Dropdown is behaving correctly on a lot of
use cases
DropdownMenuInnerSelect|Ok|
TabList|Ok|Removed onClickOutside called in dropdown clickable
component, validated with Raph who recently worked on this
DateInput|Ok|
MultiWorkspaceDropdownDefaultComponents|Ok|
AdvancedFilterChip|Ok|
EditableFilterDropdownButton|Ok|
UpdateViewButtonGroup|Ok|
ViewBarDetailsAddFilterButton|Ok|
ViewBarFilterButton|Ok|
ViewBarFilterDropdown|Ok|
ViewBarFilterDropdownAdvancedFilterButton|Ok|
ViewPickerDropdown|Ok|
ViewPickerListContent|Ok|
ViewPickerOptionDropdown|Ok|
WorkflowEditTriggerDatabaseEventForm|Ok|
WorkflowVariablesDropdownWorkflowStepItems|Ok|
AttachmentDropdown|Ok|
SupportDropdown|Ok|
Co-authored-by: Charles Bochet <charlesBochet@users.noreply.github.com>
Co-authored-by: Charles Bochet <charles@twenty.com>
Moves system-level operations (auth, billing, admin) to use the
/metadata endpoint instead of /graphql.
This cleans up the endpoint separation so /graphql is purely for core
objects (Company, People, etc.) and /metadata handles all system
operations.
Part of prep work for webhook/API key core migration.
# What this PR does
This PR introduces what’s needed to progressively refactor the
useDropdown hooks we have.
It removes useDropdownV2 and renames useDropdown used for multi-page
dropdowns to useDropdownContextStateManagement
## The 3 useDropdown hooks
There are currently 3 useDropdown hooks :
One is used for managing states in some dropdowns that have multiple
inner pages with contexts and without recoil. It is limited and would
need a separate refactoring, thus I just renamed it.
Then we have useDropdown and useDropdownV2, which followed our multiple
versions of recoil state management wrappers.
Now that the state management has been stabilized, we can merge
everything on the last version.
## What this refactor will allow next
This refactor will allow to refactor the legacy recoil state management,
because useDropdown is depending on legacy recoil states with scopeId.
Because there are only a dozen of those legacy states left, and the
dropdown’s ones are the harder to refactor, because swapping them as-is
causes a big QA, and if we have a big QA to do on all dropdowns, better
refactor the whole dropdown management and have everything clean.
After this refactor, we will be able to delete the legacy dropdown
states, and proceed with the other legacy states, then removing all the
legacy recoil state mangament.
## How do we allow progressive refactoring ?
There are many places where useDropdown is used.
To have an easier refactoring process, we want to merge multiple small
pull requests so that it is easier to QA and review.
For this we will maintain both legacy component state and component
state V2 in parallel for isDropdownOpen, so that the new hooks
`useOpenDropdown` , `useCloseDropdown` are doing the same thing than
`useDropdown` and `useDropdownV2` .
Thus for the moment, whether we use the legacy hooks or the new ones,
the effects are the same.
And we can have dropdowns operating on the old states and the new states
living side by side in the app.
## QA
Component | Status | Comments
-- | -- | --
CommandMenuActionMenuDropdown | Ok |
RecordIndexActionMenuDropdown | Ok |
RecordShowRightDrawerOpenRecordButton | Ok |
useCloseActionMenu | Ok |
CommandMenuContextChipGroups | Ok |
useCommandMenuCloseAnimationCompleteCleanup | Ok |
ObjectOptionsDropdown | Ok |
ObjectOptionsDropdownContent | Ok |
ObjectOptionsDropdownFieldsContent | Ok |
ObjectOptionsDropdownHiddenFieldsContent | Ok |
ObjectOptionsDropdownHiddenRecordGroupsContent | Ok |
ObjectOptionsDropdownLayoutContent | Ok |
ObjectOptionsDropdownLayoutOpenInContent | Ok |
ObjectOptionsDropdownMenuContent | Ok |
ObjectOptionsDropdownRecordGroupFieldsContent | Ok |
ObjectOptionsDropdownRecordGroupsContent | Ok |
ObjectOptionsDropdownRecordGroupSortContent | Ok |
RecordBoardColumnHeaderAggregateDropdown | Ok |
AggregateDropdownContent | Ok |
RecordBoardColumnHeaderAggregateDropdownFieldsContent | Ok |
RecordBoardColumnHeaderAggregateDropdownMenuContent | Ok |
RecordBoardColumnHeaderAggregateDropdownMenuContent | Ok |
RecordBoardColumnHeaderAggregateDropdownOptionsContent | Ok |
RecordBoard | Ok | Used closeAnyOpenDropdown instead for a better UX
RecordBoardCard | Ok |
useRecordBoardSelection | Ok |
RecordTableColumnAggregateFooterDropdownContent | Ok |
RecordTableColumnFooterWithDropdown | Ok |
useOpenRecordFilterChipFromTableHeader | Ok |
useCloseAnyOpenDropdown | Ok |
useCloseDropdownFromOutside | Removed | Removed because unused
useDropdownV2 | Removed | Removed because all calls have been removed
useOpenDropdownFromOutside | Removed | Removed because unused
useCloseAndResetViewPicker | Ok |
WorkflowVariablesDropdown | Ok |
This PR fixes problems with date filter :
- Filter chip shows the label with plural, ex : `This weeks`
- Using a relative filter now initializes to `This day`
- Switching between the different relative sub-operands (This, Past,
Next) now initializes with a value so we're never in an "empty" state.
This PR fixes a bug that occurs during filter operand changes.
As a date filter can contain values that have a different shape, mainly
date ISO string and hard-coded relative dates, changing the operand
without resetting the value to its default was causing a crash.
This PR also extracts the logic that computes the right part of a filter
chip into a util instead of a difficult to understand ternary, thus
solving small bugs in the value displayed also.
Fixes https://github.com/twentyhq/twenty/issues/12778
Workflow views and versions are seed being opened by default into record
page. Issue is that:
- new views are set by default to side panel. Updated by copying the
current opensIn value to the new view
- users can still select side panel into their options. Disabling the
button.
<img width="650" alt="Capture d’écran 2025-06-19 à 16 15 34"
src="https://github.com/user-attachments/assets/0ddc3284-0fed-404f-9c1d-225c65549fd1"
/>
This PR is the first part of a refactoring aiming to deprecate the
hotkey scopes api in favor of the new focus stack api which is more
robust.
The refactored components in this PR are the dropdowns and the side
panel/command menu.
- Replaced `useScopedHotkeys` by `useHotkeysOnFocusedElement` for all
dropdown components, selectable lists and the command menu
- Introduced `focusId` for all dropdowns and created a common hotkey
scope `DropdownHotkeyScope` for backward compatibility
- Replaced `setHotkeyScopeAndMemorizePreviousScope` occurrences with
`usePushFocusItemToFocusStack` and `goBackToPreviousHotkeyScope` with
`removeFocusItemFromFocusStack`
Note: Test that the shorcuts and arrow key navigation still work
properly when interacting with dropdowns and the command menu.
Bugs that I have spotted during the QA but which are already present on
main:
- Icon picker select with arrow keys doesn’t work inside dropdowns
- Some dropdowns are not selectable with arrow keys (no selectable list)
- Dropdowns in dropdowns don’t reset the hotkey scope correctly when
closing
- The table click outside is not triggered after closing a table cell
and clicking outside of the table
- Variables can now be handled for select/multiselect/relations
- Hide field not supported in forms (source, rating)
- Add tests for schemas
Remaning issues:
- country/currency pickers not working
- stories for components
- variable picker hidden for dates
Opening a date picker when creating a filter now directly applies
today's date to avoid any in-between state issues.
This allows the date picker and the operand selection to behave nicely
when creating a date filter.
Fixes https://github.com/twentyhq/core-team-issues/issues/1049
This PR refactors the `DropdownMenuItemsContainer` component and
simplifies its inner parts, which have been modified over months for
different needs without taking the time to have a global approach.
It should however be noted that due to the recent refactor of the
`DropdownContent`, it is now much easier to refactor
`DropdownMenuItemsContainer`, mainly because of the width management
being nicely handled by `DropdownContent` now.
Fixes https://github.com/twentyhq/twenty/issues/11766
# Changes
The `width` props of `DropdownMenuItemsContainer` and its usage in
calling components have been removed.
The multiple ternaries inside `DropdownMenuItemsContainer` have been
reduced to one ternary on `scrollable` props.
The `ScrollWrapper` usage has been removed from
`DropdownMenuItemsContainer`, because the only thing we need is to have
a simple `overflow-y: scroll;` CSS property.
Why ? Because it was previously relevant to have a `ScrollWrapper`, when
we were using an external library, but now that `ScrollWrapper` is a
simple `div` with overflowing, which only benefit is to expose a hook to
imperatively toggle this overflowing behavior from outside (mainly
useful for table fixed row and column), and that we don’t need this for
`DropdownMenuItemsContainer`, then it follows that we just need a simple
overflowing `div` container, which simplifies everything and boils down
our `DropdownMenuItemsContainer` to a straightforward and standard CSS
stack.
We remove the temporary `scrollWrapperHeightAuto` props that was used to
fix a bug in a previous PR, we also rollback `ScrollWrapper` to its
previous state with `width: 100%` and `height: 100%` and removed
`heightAuto` props.
The `hasMaxHeight` props is kept, but the `168` pixels value is
extracted in a constant.
# QA
Component | Comment
-- | --
CommandMenuActionDropdown | Reported bug
https://github.com/twentyhq/twenty/issues/12541
RecordIndexActionMenuDropdown |
AttachmentDropdown | Cannot test because cannot add a file (currently
broken, maybe because of permissions ?)
CommandMenuContextChipGroups |
FavoriteFolderNavigationDrawerItemDropdown |
FavoriteFolderPicker |
FavoriteFolderPickerFooter |
AdvancedFilterAddFilterRuleSelect |
AdvancedFilterFieldSelectMenu |
AdvancedFilterRecordFilterGroupOptionsDropdown |
AdvancedFilterRecordFilterOperandSelect |
AdvancedFilterRecordFilterOptionsDropdown |
AdvancedFilterSubFieldSelectMenu |
ObjectFilterDropdownBooleanSelect |
ObjectFilterDropdownCountrySelect |
ObjectFilterDropdownCurrencySelect |
ObjectFilterDropdownNumberInput |
ObjectFilterDropdownOptionSelect | Fixed “No result” case
ObjectFilterDropdownRecordRemoveFilterMenuItem | Removed because unused
ObjectFilterDropdownTextInput |
ObjectOptionsDropdownFieldsContent | Spotted bug with icon eye
https://github.com/twentyhq/twenty/issues/12545
ObjectOptionsDropdownHiddenFieldsContent | Spotted bug with icon eye
https://github.com/twentyhq/twenty/issues/12545
ObjectOptionsDropdownLayoutContent | Refactored
DropdownMenuItemsContainer usage with DropdownMenuSeparator, spotted bug
switch view type https://github.com/twentyhq/twenty/issues/12546
ObjectOptionsDropdownMenuContent | Refactored DropdownMenuItemsContainer
usage with DropdownMenuSeparator
ObjectOptionsDropdownLayoutOpenInContent |
ObjectOptionsDropdownMenuViewName |
ObjectOptionsDropdownRecordGroupFieldsContent |
ObjectOptionsDropdownRecordGroupSortContent |
ObjectSortDropdownButton |
RecordBoardColumnDropdownMenu |
RecordBoardColumnDropdownMenu |
RecordBoardColumnHeaderAggregateDropdownFieldsContent |
RecordBoardColumnHeaderAggregateDropdownMenuContent |
RecordBoardColumnHeaderAggregateDropdownOptionsContent |
MultiItemFieldInput | Added hasMaxHeight on list of items
MultiItemFieldMenuItem |
RecordGroupsVisibilityDropdownSection |
MultipleRecordPicker |
MultipleRecordPickerMenuItems |
SingleRecordPickerMenuItems |
SingleRecordPickerMenuItemsWithSearch |
RecordDetailRelationRecordsListItem |
RecordTableColumnAggregateFooterDropdownSubmenuContent |
RecordTableColumnAggregateFooterMenuContent |
RecordTableHeaderPlusButtonContent |
RecordTableHeaderPlusButtonContent |
MultipleSelectDropdown |
SettingsAccountsRowDropdownMenu |
ConfigVariableDatabaseInput |
ConfigVariableOptionsDropdownContent |
SettingsDataModelNewFieldBreadcrumbDropDown |
SettingsDataModelFieldSelectFormOptionRow |
SettingsObjectFieldActiveActionDropdown |
SettingsObjectFieldInactiveActionDropdown |
SettingsObjectInactiveMenuDropDown |
SettingsIntegrationDatabaseConnectionSummaryCard |
SettingsRoleAssignmentWorkspaceMemberPickerDropdown |
SettingsRolePermissionsObjectLevelObjectPickerDropdownContent | Cannot
test
SettingsSecurityApprovedAccessDomainRowDropdownMenu | Cannot test
SettingsSecuritySSORowDropdownMenu | Cannot test
SettingsServerlessFunctionTabEnvironmentVariableTableRow | Cannot test
MatchColumnSelectFieldSelectDropdownContent |
MatchColumnSelectSubFieldSelectDropdownContent |
SubMatchingSelectInput |
SupportDropdown |
IconPicker |
Select |
SelectInput |
CurrencyPickerDropdownSelect |
PhoneCountryPickerDropdownSelect |
CustomSlashMenu |
TabListDropdown | Cannot test
MultiWorkspaceDropdownDefaultComponents | Removed unnecessary
StyledDropdownMenuItemsContainer
MultiWorkspaceDropdownThemesComponents |
MultiWorkspaceDropdownWorkspacesListComponents |
UpdateViewButtonGroup |
ViewBarFilterDropdownFieldSelectMenu |
ViewFieldsVisibilityDropdownSection |
ViewPickerContentCreateMode |
ViewPickerContentEditMode |
ViewPickerListContent | Add hasMaxHeight to limit the height of view
list
ViewPickerOptionDropdown |
WorkflowEditTriggerDatabaseEventForm |
WorkflowVariablesDropdownFieldItems |
WorkflowVariablesDropdownObjectItems |
WorkflowVariablesDropdownWorkflowStepItems |
<!-- notionvc: a3a87101-9944-4b03-a29d-b2974d5ffa9d -->
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
Fixes#7929
This PR implements a system to capture and preserve the filters and
sorts when navigating from an index view to a record show page. This
information is stored in a context store component state.
This allows users to navigate between records inside the record page
while maintaining context from the index view.
# What
Fully deprecate old relations because we have one bug tied to it and it
make the codebase complex
# How I've made this PR:
1. remove metadata datasource (we only keep 'core') => this was causing
extra complexity in the refactor + flaky reset
2. merge dev and demo datasets => as I needed to update the tests which
is very painful, I don't want to do it twice
3. remove all code tied to RELATION_METADATA /
relation-metadata.resolver, or anything tied to the old relation system
4. Remove ONE_TO_ONE and MANY_TO_MANY that are not supported
5. fix impacts on the different areas : see functional testing below
# Functional testing
## Functional testing from the front-end:
1. Database Reset ✅
2. Sign In ✅
3. Workspace sign-up ✅
5. Browsing table / kanban / show ✅
6. Assigning a record in a one to many / in a many to one ✅
7. Deleting a record involved in a relation ✅ => broken but not tied to
this PR
8. "Add new" from relation picker ✅ => broken but not tied to this PR
9. Creating a Task / Note, Updating a Task / Note relations, Deleting a
Task / Note (from table, show page, right drawer) ✅ => broken but not
tied to this PR
10. creating a relation from settings (custom / standard x oneToMany /
manyToOne) ✅
11. updating a relation from settings should not be possible ✅
12. deleting a relation from settings (custom / standard x oneToMany /
manyToOne) ✅
13. Make sure timeline activity still work (relation were involved
there), espacially with Task / Note => to be double checked ✅ => Cannot
convert undefined or null to object
14. Workspace deletion / User deletion ✅
15. CSV Import should keep working ✅
16. Permissions: I have tested without permissions V2 as it's still hard
to test v2 work and it's not in prod yet ✅
17. Workflows global test ✅
## From the API:
1. Review open-api documentation (REST) ✅
2. Make sure REST Api are still able to fetch relations ==> won't do, we
have a coupling Get/Update/Create there, this requires refactoring
3. Make sure REST Api is still able to update / remove relation => won't
do same
## Automated tests
1. lint + typescript ✅
2. front unit tests: ✅
3. server unit tests 2 ✅
4. front stories: ✅
5. server integration: ✅
6. chromatic check : expected 0
7. e2e check : expected no more that current failures
## Remove // Todos
1. All are captured by functional tests above, nothing additional to do
## (Un)related regressions
1. Table loading state is not working anymore, we see the empty state
before table content
2. Filtering by Creator Tim Ap return empty results
3. Not possible to add Tasks / Notes / Files from show page
# Result
## New seeds that can be easily extended
<img width="1920" alt="image"
src="https://github.com/user-attachments/assets/d290d130-2a5f-44e6-b419-7e42a89eec4b"
/>
## -5k lines of code
## No more 'metadata' dataSource (we only have 'core)
## No more relationMetadata (I haven't drop the table yet it's not
referenced in the code anymore)
## We are ready to fix the 6 months lag between current API results and
our mocked tests
## No more bug on relation creation / deletion
---------
Co-authored-by: Weiko <corentin@twenty.com>
Co-authored-by: Félix Malfait <felix@twenty.com>
Description:
Resolved a bug where pressing the Escape key did not clear the filter
chips when no filter value was present.
Added a call to onClickOutside inside the useScopedHotkeys hook to
ensure filter chips are removed when Escape is pressed and the dropdown
is open but empty.
https://github.com/user-attachments/assets/42ed35b0-f5a8-4d26-8407-fdd5e2cc4a42fix#12319
Raphaël Bosi