This PR prepares the refactor of record field definition and column
definition.
We need to separate the two concepts of FieldInput and FieldContext at
the cell level, and the new RecordField concept that will replace
FieldDefinition at the metadata and state level.
So we create a new ui sub-folder in the already existing record-field
folder, in order to separate those two concepts that are still very
close.
When the target is not in the direct next step ids of the source (step
or trigger), check if there is a filter between both. If yes, delete the
filter and remove it from source next step ids.
Also refactored the existing.
In this PR
- Introduction of readableFields and updatableFields in
objectMetadataItem selector to ease filtering from a developer
experience perspective ( + to help developers think to do it). In
discussion @lucasbordeau @charlesBochet
- Remove non-updatable field from CSV import process (@etiennejouan)
- QA fix / Non-readable fields should not show on show page
- QA fix / It should not be offered to create a kanban view on a
non-readable field
- QA fix / It should not be offered to create view groups on a
non-readable field
- QA fix / Rating field should have a readonly mode
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
This PR cleans a few parts of the workflow features and fixes a few
improper behaviors.
Here is a non-exaustive list of improved things:
- Clicking on an action will always reset the command menu's navigation
stack. Previously, the behavior wasn't unified between workflows,
workflow versions and workflow runs.
- Opening a step in the side panel is now down in the `onClick` event
handler put on individual Reactflow nodes. This makes interoperability
between filters (which are buttons on edges) and traditional actions.
- Simplified the code that automatically opens pending forms in the side
panel. This feature should now work more predictably.
- Splitted the `WorkflowDiagramEmptyTrigger` component into
`WorkflowDiagramEmptyTriggerEditable` and
`WorkflowDiagramEmptyTriggerReadonly`. This makes handling events easier
as the behavior isn't the same in both cases.
- Dropped all `useOnSelectionChange` hooks that were used to open steps
in the side panel upon user selection.
- Created a specific `WorkflowRunDiagramStepNode` instead of using
`WorkflowDiagramStepNodeReadonly` in `WorkflowRunDiagramCanvas`
- Deleted `useHandleWorkflowRunDiagramCanvasInit` as it was used to open
the initially selected step in the command menu, which is now handled in
an effect that works for all cases, including workflow run's state
refreshing.
Closes https://github.com/twentyhq/core-team-issues/issues/1227
Closes https://github.com/twentyhq/twenty/issues/11923
This PR removes any V2 naming in state management logic and some minor
utils and hooks.
It has a lot of changes but nearly all of them were made by the rename
functionality of vscode which is deterministic, so it shouldn't
introduce any regression.
QA has been made on this PR on the main features of the app without any
noticeable issue.
Also renamed some other v2 naming related items :
- TextInputV2 => TextInput
- TextInput => SettingsTextInput
- ObjectFilterDropdownFilterSelectMenuItemV2 =>
ObjectFilterDropdownFilterSelectMenuItem
- useInitDraftValueV2 => useInitDraftValue
- useOpenRecordTableCellV2 => useOpenRecordTableCell
In our Graphql schema, ids are typed as UUID.
Our FE codegen is typing it as 'any', unless we say otherwise. Fixing it
and fixing the impacts in the codebase
Fixes#13250
This PR fixes the breadcrumb display issue where API names were shown
instead of friendly object names when navigating to related objects in
the detail view.
---------
Co-authored-by: Félix Malfait <felix@twenty.com>
This PR removes every legacy state management logic left in the code
base, we only keep our last component state management logic.
Removed :
- Scoped states logic
- Dropdown scope logic
- Scope id naming
- Component state v1
- Component state v2_alpha
# QA
| Component | Comments |
| --- | --- |
| AttachementDropdown | Ok |
| ObjectTasks | Ok |
| ActivityRichTextEditor | Ok |
| App | Ok dialogs work |
| AppRouterProviders | Ok dialogs work |
| RecordBoardScrollToFocusedCardEffect | Ok |
| RecordBoard | Ok |
| RecordBoardCard | OK |
| useSelectAllCards | Ok |
| RecordInlineCell | Ok |
| useInlineCell | Ok |
| RecordDetailRelationRecordsListItem | Ok |
| RecordDetailRelationSectionDropdownToMany | Ok |
| RecordDetailRelationSectionDropdownToOne | Ok |
| useHandleContainerMouseEnter | Ok |
| useResetTableRowSelection | Ok |
| useSelectAllRows | Ok |
| useSetRecordTableData | Ok |
| useRecordTable | Ok |
| useRecordTableMoveFocusedCell | Ok |
| useRecordTableMoveFocusedRow | Ok |
| useMoveHoverToCurrentCell | OK |
| useTriggerActionMenuDropdown | Ok |
| RecordTableBodyDragDropContextProvider | Ok |
| RecordTableHeaderCell | Ok |
| useSetCurrentRowSelected | Ok |
| useRecordTitleCell | Ok |
| SettingsObjectFieldActiveActionDropdown | Ok |
| SettingsObjectFieldInactiveActionDropdown | Ok |
| SettingsObjectFieldItemTableRow | Ok |
| SettingsObjectInactiveMenuDropDown | Ok |
| SettingsRoleEditEffect | Ok |
| SettingsRolesQueryEffect | Ok |
| Dropdown | Ok |
| useSelectableList | Ok |
| useSelectableListHotKeys | Ok |
| useSelectableListListenToEnterHotkeyOnItem | Ok |
| useNavigationSection | Ok |
| useCreateViewFromCurrentState | Ok |
| useDeleteViewFromCurrentState | Ok |
| useUpdateViewFromCurrentState | Ok |
| ViewPickerFavoriteFoldersDropdown | Ok |
| useCreateViewFromCurrentView | Ok |
| ViewBarDetails | Ok |
| WorkflowRunVisualizer | Ok |
| useHandleWorkflowRunDiagramCanvasInit | Ok |
| WorkflowDiagramCanvasBase | Ok |
| WorkflowRunVisualizerEffect | Ok |
| useRemoveStepFilter | Ok |
| useRemoveStepFilterGroup | Ok |
| useUpsertStepFilterSettings | Ok |
| WorkflowFindRecordsFilters | Ok |
| SettingsObjects | Ok |
This PR adds any field filter request generation utils with its unit
test.
It also calls this new util in the relevant requests for table and
board.
This PR also adds a new corresponding state in context store so that the
filter is handled in command menu and actions.
We also add this new filter to the aggregate queries.
The RecordShowPage story was also fixed.
## TODO
- [ ] add dropdown to use records from outside the context
- [x] add loader for files chip
- [x] add roleId where it's necessary
- [x] Split AvatarChip in two components. One with the icon that will
call the second with leftComponent.
- [ ] Fix tests
- [x] Fix UI regression on Search
This PR does not produce any functional changes for our users. It
prepares the branches for workflows by:
- decommissioning `output` and `context` fields or `workflowRun` records
and use newly created `state` field from front-end and back-end
- use `stepStatus` computed by `back-end` in `front-end`
- add utils and types in `twenty-shared/workflow` (not completed, a
follow-up is scheduled
https://github.com/twentyhq/core-team-issues/issues/1211)
- add concurrency to `workflowQueue` message queue to avoid weird branch
execution when using forms in workflow branches
- add a WithLock decorator for better dev experience of
`CacheLockService.withLock` usage
Here is an example of such a workflow running (front branch display is
not yet done that's why it looks ugly) ->
https://discord.com/channels/1130383047699738754/1258024460238192691/1392897615171158098
This PR fixes a focus conflict with global hotkeys, mainly "?" that
opens the shortcut helper dialog.
This fix works but we should maybe think about a more generic approach
in another issue, like disabling global hotkeys when certain types of
components are open (input, dropdown, etc.)
Fixes https://github.com/twentyhq/twenty/issues/13197
---------
Co-authored-by: bosiraphael <raphael.bosi@gmail.com>
Co-authored-by: Raphaël Bosi <71827178+bosiraphael@users.noreply.github.com>
Moves system-level operations (auth, billing, admin) to use the
/metadata endpoint instead of /graphql.
This cleans up the endpoint separation so /graphql is purely for core
objects (Company, People, etc.) and /metadata handles all system
operations.
Part of prep work for webhook/API key core migration.
### Added IMAP integration
This PR adds support for connecting email accounts via IMAP protocol,
allowing users to sync their emails without OAuth.
#### DB Changes:
- Added customConnectionParams and connectionType fields to
ConnectedAccountWorkspaceEntity
#### UI:
- Added settings pages for creating and editing IMAP connections with
proper validation and connection testing.
- Implemented reconnection flows for handling permission issues.
#### Backend:
- Built ImapConnectionModule with corresponding resolver and service for
managing IMAP connections.
- Created MessagingIMAPDriverModule to handle IMAP client operations,
message fetching/parsing, and error handling.
#### Dependencies:
Integrated `imapflow` and `mailparser` libraries with their type
definitions to handle the IMAP protocol communication.
---------
Co-authored-by: greptile-apps[bot] <165735046+greptile-apps[bot]@users.noreply.github.com>
Co-authored-by: Félix Malfait <felix.malfait@gmail.com>
Co-authored-by: Félix Malfait <felix@twenty.com>
This PR aims at improving readability in sentry and user experience with
runtime errors.
**GraphQL errors (and ApolloError)**
1. In sentry we have a lot of "Object captured as exception with keys:
extensions, message" errors (2k over the last 90d), on which we have
zero information. This is because in apollo-factory we were passing on
GraphQL errors to sentry directly why sentry expects the structure of a
JS Error. We are now changing that, rebuilding an Error object and
attempting to help grouping by creating a fingerPrint based on error
code and truncated operationName (same as we do in the back for 500
graphql errors).
2. In sentry we have a lot of ApolloError, who actually correspond to
errors that should not be logged in sentry (Forbidden errors such as
"Email is not verified"), or errors that are already tracked by back-end
(Postgres errors such as "column xxx does not exist"). This is because
ApolloErrors become unhandled rejections errors if they are not caught
and automatically sent to sentry through the basic config. To change
that we are now filtering out ApolloErrors created from GraphQL Errors
before sending error to sentry:
<img width="524" alt="image"
src="https://github.com/user-attachments/assets/02974829-26d9-4a9e-8c4c-cfe70155e4ab"
/>
**Runtime errors**
4. Runtime errors were all caught by sentry with the name "Error",
making them not easy to differentiate on sentry (they were not grouped
together but all appeared in the list as "Error"). We are replacing the
"Error" name with the error message, or the error code if present. We
are introducing a CustomError class that allows errors whose message
contain dynamic text (an id for instance) to be identified on sentry
with a common code. _(TODO: if this approach is validated then I have
yet to replace Error with dynamic error messages with CustomError)_
5. Runtime error messages contain technical details that do not mean
anything to users (for instance, "Invalid folder ID: ${droppableId}",
"ObjectMetadataItem not found", etc.). Let's replace them with "Please
refresh the page." to users and keep the message error for sentry and
our dev experience (they will still show in the console as uncaught
errors).
# What this PR does
This PR introduces what’s needed to progressively refactor the
useDropdown hooks we have.
It removes useDropdownV2 and renames useDropdown used for multi-page
dropdowns to useDropdownContextStateManagement
## The 3 useDropdown hooks
There are currently 3 useDropdown hooks :
One is used for managing states in some dropdowns that have multiple
inner pages with contexts and without recoil. It is limited and would
need a separate refactoring, thus I just renamed it.
Then we have useDropdown and useDropdownV2, which followed our multiple
versions of recoil state management wrappers.
Now that the state management has been stabilized, we can merge
everything on the last version.
## What this refactor will allow next
This refactor will allow to refactor the legacy recoil state management,
because useDropdown is depending on legacy recoil states with scopeId.
Because there are only a dozen of those legacy states left, and the
dropdown’s ones are the harder to refactor, because swapping them as-is
causes a big QA, and if we have a big QA to do on all dropdowns, better
refactor the whole dropdown management and have everything clean.
After this refactor, we will be able to delete the legacy dropdown
states, and proceed with the other legacy states, then removing all the
legacy recoil state mangament.
## How do we allow progressive refactoring ?
There are many places where useDropdown is used.
To have an easier refactoring process, we want to merge multiple small
pull requests so that it is easier to QA and review.
For this we will maintain both legacy component state and component
state V2 in parallel for isDropdownOpen, so that the new hooks
`useOpenDropdown` , `useCloseDropdown` are doing the same thing than
`useDropdown` and `useDropdownV2` .
Thus for the moment, whether we use the legacy hooks or the new ones,
the effects are the same.
And we can have dropdowns operating on the old states and the new states
living side by side in the app.
## QA
Component | Status | Comments
-- | -- | --
CommandMenuActionMenuDropdown | Ok |
RecordIndexActionMenuDropdown | Ok |
RecordShowRightDrawerOpenRecordButton | Ok |
useCloseActionMenu | Ok |
CommandMenuContextChipGroups | Ok |
useCommandMenuCloseAnimationCompleteCleanup | Ok |
ObjectOptionsDropdown | Ok |
ObjectOptionsDropdownContent | Ok |
ObjectOptionsDropdownFieldsContent | Ok |
ObjectOptionsDropdownHiddenFieldsContent | Ok |
ObjectOptionsDropdownHiddenRecordGroupsContent | Ok |
ObjectOptionsDropdownLayoutContent | Ok |
ObjectOptionsDropdownLayoutOpenInContent | Ok |
ObjectOptionsDropdownMenuContent | Ok |
ObjectOptionsDropdownRecordGroupFieldsContent | Ok |
ObjectOptionsDropdownRecordGroupsContent | Ok |
ObjectOptionsDropdownRecordGroupSortContent | Ok |
RecordBoardColumnHeaderAggregateDropdown | Ok |
AggregateDropdownContent | Ok |
RecordBoardColumnHeaderAggregateDropdownFieldsContent | Ok |
RecordBoardColumnHeaderAggregateDropdownMenuContent | Ok |
RecordBoardColumnHeaderAggregateDropdownMenuContent | Ok |
RecordBoardColumnHeaderAggregateDropdownOptionsContent | Ok |
RecordBoard | Ok | Used closeAnyOpenDropdown instead for a better UX
RecordBoardCard | Ok |
useRecordBoardSelection | Ok |
RecordTableColumnAggregateFooterDropdownContent | Ok |
RecordTableColumnFooterWithDropdown | Ok |
useOpenRecordFilterChipFromTableHeader | Ok |
useCloseAnyOpenDropdown | Ok |
useCloseDropdownFromOutside | Removed | Removed because unused
useDropdownV2 | Removed | Removed because all calls have been removed
useOpenDropdownFromOutside | Removed | Removed because unused
useCloseAndResetViewPicker | Ok |
WorkflowVariablesDropdown | Ok |
In morph relation pickers, we were not taking into account permissions
when computing the list of objects to search for, while we should not
search for objects we don't have read permissions on (permission denied
error)
This PR is the first part of a refactoring aiming to deprecate the
hotkey scopes api in favor of the new focus stack api which is more
robust.
The refactored components in this PR are the dropdowns and the side
panel/command menu.
- Replaced `useScopedHotkeys` by `useHotkeysOnFocusedElement` for all
dropdown components, selectable lists and the command menu
- Introduced `focusId` for all dropdowns and created a common hotkey
scope `DropdownHotkeyScope` for backward compatibility
- Replaced `setHotkeyScopeAndMemorizePreviousScope` occurrences with
`usePushFocusItemToFocusStack` and `goBackToPreviousHotkeyScope` with
`removeFocusItemFromFocusStack`
Note: Test that the shorcuts and arrow key navigation still work
properly when interacting with dropdowns and the command menu.
Bugs that I have spotted during the QA but which are already present on
main:
- Icon picker select with arrow keys doesn’t work inside dropdowns
- Some dropdowns are not selectable with arrow keys (no selectable list)
- Dropdowns in dropdowns don’t reset the hotkey scope correctly when
closing
- The table click outside is not triggered after closing a table cell
and clicking outside of the table
Note and task tabs in side panel should only show if user has reading
permission on them.
"Go to companies", "Go to workflows", etc. in command menu should only
show is user has reading permission on related objects.
<img width="507" alt="Capture d’écran 2025-06-17 à 11 09 50"
src="https://github.com/user-attachments/assets/3a2a4c25-0b9b-4ee6-b18f-b019b8a56d47"
/>
<img width="505" alt="Capture d’écran 2025-06-17 à 11 09 56"
src="https://github.com/user-attachments/assets/8a219955-cc8e-4dbf-a4f9-a50e1aaa4b59"
/>
**How to test**
Assign a user with a custom role that has **no** read permissions on
notes/tasks/workflows/companies/opportunities/people (no need to test
them all but at least one between note and tasks; workflows; one between
companies/opportunities/people). Check that you don't see the related
tab / action.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
This PR fixes a bug where the side panel couldn't be closed after the
execution of a workflow with a form. After the execution of the
workflow, `goBackFromCommandMenu` is called to show the workflow run.
The hotkey scope wasn't reset properly, and the click outside listener
from the side panel is only triggered when the scope is
`CommandMenuFocused`.
This PR sets the hotkey scope to `CommandMenuFocused` when going back or
when navigating inside the command menu history.
Note: (we don't use `setHotkeyScopeAndMemorizePreviousScope` here
because we don't need to memorize the active hotkey scope of the page we
are leaving)
Before:
https://github.com/user-attachments/assets/09edf97b-7520-46ce-ade3-6bb6b15ef435
After:
https://github.com/user-attachments/assets/16c288cb-1d42-4099-8925-74a673f7a479
### Issue:
overflow of input fields when opening the side panel.
Could be imporved with a better command menu state handling
### Solution:
In command menu hooks, we now close all dropdowns when opening the side
panel. This ensures all UI elements are close properly before the
sidepanel shows up
Fixes : https://github.com/twentyhq/twenty/issues/12485
Co-authored-by: Charles Bochet <charles@twenty.com>
Added an argument `closeCommandMenuFromShowPageOptionsMenu` which allows
us to not only close the parent action menu if the action is located
inside the record page action menu dropdown, but to also close the
command menu after, which is the behavior we want for the destroy
action.
# What
Fully deprecate old relations because we have one bug tied to it and it
make the codebase complex
# How I've made this PR:
1. remove metadata datasource (we only keep 'core') => this was causing
extra complexity in the refactor + flaky reset
2. merge dev and demo datasets => as I needed to update the tests which
is very painful, I don't want to do it twice
3. remove all code tied to RELATION_METADATA /
relation-metadata.resolver, or anything tied to the old relation system
4. Remove ONE_TO_ONE and MANY_TO_MANY that are not supported
5. fix impacts on the different areas : see functional testing below
# Functional testing
## Functional testing from the front-end:
1. Database Reset ✅
2. Sign In ✅
3. Workspace sign-up ✅
5. Browsing table / kanban / show ✅
6. Assigning a record in a one to many / in a many to one ✅
7. Deleting a record involved in a relation ✅ => broken but not tied to
this PR
8. "Add new" from relation picker ✅ => broken but not tied to this PR
9. Creating a Task / Note, Updating a Task / Note relations, Deleting a
Task / Note (from table, show page, right drawer) ✅ => broken but not
tied to this PR
10. creating a relation from settings (custom / standard x oneToMany /
manyToOne) ✅
11. updating a relation from settings should not be possible ✅
12. deleting a relation from settings (custom / standard x oneToMany /
manyToOne) ✅
13. Make sure timeline activity still work (relation were involved
there), espacially with Task / Note => to be double checked ✅ => Cannot
convert undefined or null to object
14. Workspace deletion / User deletion ✅
15. CSV Import should keep working ✅
16. Permissions: I have tested without permissions V2 as it's still hard
to test v2 work and it's not in prod yet ✅
17. Workflows global test ✅
## From the API:
1. Review open-api documentation (REST) ✅
2. Make sure REST Api are still able to fetch relations ==> won't do, we
have a coupling Get/Update/Create there, this requires refactoring
3. Make sure REST Api is still able to update / remove relation => won't
do same
## Automated tests
1. lint + typescript ✅
2. front unit tests: ✅
3. server unit tests 2 ✅
4. front stories: ✅
5. server integration: ✅
6. chromatic check : expected 0
7. e2e check : expected no more that current failures
## Remove // Todos
1. All are captured by functional tests above, nothing additional to do
## (Un)related regressions
1. Table loading state is not working anymore, we see the empty state
before table content
2. Filtering by Creator Tim Ap return empty results
3. Not possible to add Tasks / Notes / Files from show page
# Result
## New seeds that can be easily extended
<img width="1920" alt="image"
src="https://github.com/user-attachments/assets/d290d130-2a5f-44e6-b419-7e42a89eec4b"
/>
## -5k lines of code
## No more 'metadata' dataSource (we only have 'core)
## No more relationMetadata (I haven't drop the table yet it's not
referenced in the code anymore)
## We are ready to fix the 6 months lag between current API results and
our mocked tests
## No more bug on relation creation / deletion
---------
Co-authored-by: Weiko <corentin@twenty.com>
Co-authored-by: Félix Malfait <felix@twenty.com>
ressolve #12205
This PR fixes the issue where the record in the command menu was
reopening when clicking the same field again.
https://github.com/user-attachments/assets/52da7b3f-4704-4a9c-8fc4-29534568b0c0
- Added recordId to cells so it can be accessed when
useListenClickOutside is triggered, and compared the previous recordId
with the new one to prevent closing the command menu for the same
record.
- When the field is clicked, we compare the lastRecordId with the new
recordId inside the openRecordInCommandMenu function to avoid reopening
the menu unnecessarily.
---------
Co-authored-by: Charles Bochet <charles@twenty.com>
Lucas Bordeau